Directory Image
This website uses cookies to improve user experience. By using our website you consent to all cookies in accordance with our Privacy Policy.

Learn the Vast Usage of Industrial DC DC Converter

Author: Lilly Allen
by Lilly Allen
Posted: Nov 07, 2016

The use of t both AC and DC voltage is high in the industrial area. The industrial operation is now highly regulated by the electric and robotic device. Without the active operation of human hands, the device swiftly and nicely manages the entire activities digitally. Most of the devices of this type are not run with a high voltage, rather a minimal DC voltage. The sudden power cut can damage the entire progress of the project and can damage the encrypted data with it. This is the reason; you have to keep the system backup with the DC power converter. You can rather convert DC 12/24 volts to the required voltage so that the waste of voltage does not happen and the backup time goes longer. Here is the demand of industrial DC DC Converter.

What is the demand of DC DC converters?

  1. The lower voltage wastes while conversion. The voltage conversion waste enhances the duration of the battery. If your device takes 13.8 volts from the 220v/230v mains, there is no issue. This is done by the step down transformers. When you need to have power backup support with the battery of 12v or 24v DC, you should better use the converter having from 12v/24v to 13.8 volt. This slight step down or step up conversion allows you a huge power save. How?
  2. If you convert 12v to 220v AC and then it is to convert to 13.8v DC, the power backup will be too low. On the other hand, the cost of power will be increased the backup capacity will be decreased.

3. In the locomotive section, the DC power converts to usable format according to the device connected with it. If you suppose, want to play a music system having the voltage consumption of 12v DC but the main voltage is 24v or more. You have to use an industrial DC DC converter. It is to mention that you can use the same type converter for LED display board, lightening devices, and so on.

  1. Today, the electrical buses and bikes are run by DC voltage and associated tools and devices run with at the different voltages. The converters are used to run all these devices connected to the main battery unit.
  2. For metal plating and finishing, you need very low voltage with a high current (Ampere).
  3. For recharging battery in any industry, you must use AC to DC converter with a fixed voltage and current flow. Sometimes, industrial DC DC Converter is used to recharge a battery in the parallel connection.

How to choose the best industrial DC DC converter

  • The converter should have the following quality-
  • High efficiency power regulation
  • The voltage conversion range will cover a wide range depending on the custom need
  • The converter should consume and waste a very low current
  • If any fault is observed, the supplying converter indicate the signal for fault detection
  • The produced temperature while converting will be less
  • The device should work on a wide range of temperature (-40 degree Celsius to +125 degree Celsius)

Choose the best company where you will avail the best sort of readymade and tailor-made bespoke industrial DC DC Converter to get the ultimate benefit.

About the Author

Lilly Allen is an electrical engineer by professional and a writer by profession. She is currently researching on custom power products and power supply and shares her thoughts and knowledge through his blogs and articles.

Rate this Article
Leave a Comment
Author Thumbnail
I Agree:
Comment 
Pictures
Author: Lilly Allen

Lilly Allen

Member since: Oct 17, 2016
Published articles: 14

Related Articles