Dell 1720 Laser Printer won't install - Solved:

Can’t install Dell 1720 Laser Printer? You are at the right place as this article will help you to install the Dell 1720 Printer Laser Printer. So, sit back, relax and enjoy the article till the end.

Before you go ahead and get started keep in mind the following points.

1. Remove the existing printer or any related drivers if available.
2. Make sure that your Printer is connected to the system and all wires are firmly connected to the sockets.
3. In the case of Wireless Printer, make sure that the Printer is connected to the network properly.
4. Ensure enough fine quality papers in the supply tray.
5. Use only genuine Dell toners and cartridges.

The printer errors are usually occurred due to the issue in the drivers. Once you install the Printer drivers properly then most of the issues are resolved as early as possible.

Installation of the Dell 1720 Laser Printer:

1. Visit the Dell Support Centre and install the latest version of the Printer firmware of Dell 1720 Laser Printer.
2. Ensure that your system and the printer both are connected to the stable network.
3. Start the installation and follow the on-screen instruction to finish the installation.
4. Once the installation is finished take a test print.
5. Don’t forget to scan the printed papers as well.
6. If the printing and the scanning are working perfectly fine then you are all set.

Your Dell 1720 Laser Printer is a smart printer and tells you in the case of any error. Let’s see what the error codes are and how to troubleshoot them.

Memory Error Code: It is the most common error reported by the users of Dell 1720 Laser Printer. It can occur due to the insufficient memory, insufficient collation Area, Complex Pages etc.

Troubleshooting Memory Error Code:

• Press the "Continue" button to dispose the error and continue the print job.
• Once the print job is done then, press the "Continue" button again and take a test print of the page.

• Check the Installed Memory option in the section of Printer Information.

• Printer has no optional Memory installed: Now you will have to purchase additional memory so that you can facilitate large and complex printing jobs.

• Printer has optional memory, but it is not showing as installed: Take the memory out and insert it back then take a test print. If the memory still isn’t detected by your Dell 1720 Laser Printer, replace with the genuine memory if available.

• Printer memory is showing as installed: Verify the amount of the memory in the Printer Memory. Make sure that the size of the document is not larger than the amount of the memory in the printer. Reduce the printing resolution. If the print job is large and complex kindly complete it in 2-3 segments.

Apart from the Memory error code, you may also encounter with short paper error code, Invalid Engine, Invalid Network Error, Error communicating with Host Computer, Front error as well. These errors can be resolved via reinstalling the correct printer drivers and packages which are easily available on the Dell Support Centre. If the problem persists and your Printer is under warranty then you can always contact the Dell Technical Support for assistance. When you contact the Dell Technical Support Helpline usually you may have to wait for several minutes or Dell people keeps transferring the call from one department to the another department. On top of that, Dell Technical Support isn’t available on weekends. Therefore, you need an expert who can respond instantly and troubleshoot the error as soon as possible. You can always get in touch with our certified Dell Printer Experts on our toll-free number for the quick support and instant resolution.

When you feel there is some problem with it, you can visit here :- http://www.number-customerservice.com/dell-printer-support/