Steps on how to do DIY plastic figures painting

For plastic figure painting, there are certain steps you need to follow. As professional artists, we do it on a daily basis. If you are willing to try a hand at it, this guide will help you explore your creativity.

Get Set

Start the painting process by setting out a clear workspace with ample amount of space. Also, ensure there is plenty of lighting. The typical room lighting is insufficient because you are working with miniatures which need fine detail. We recommend you to put a table lamp right at your workstation for extended light.

Time for Inspection

Inspect all the pieces you will paint. Analyze for any flaws, difficulties, and excess of metal or plastic. Wherever you find the excess pieces, remove it with a file or side cutters.

Priming

Prime the small figures with a white primer. The primer will protect the miniature from damage and will prevent the paint from peeling off. Further, it will also help you see the minute details on the model. It is necessary to put a thin layer of the primer and make sure that it is even. Try to avoid clogging up the finer details with the white paint.

The Painting Process

Start with the deeper sections. Paint the primary colors on the miniature. Consider it as the first layer over the primer. It is for reaching the inner parts, like, painting clothing on the miniature. Paint the undergarments first. Then take care of the shirt and pants. As you proceed, move on to the boots and then other additives, like the crown or the hat. If there are weapons, do it at the end. You must work from the inside to the outside.

Adding a Resolution

Wash the plastic figure in a very wet black-ink solution. It is a significant step. It will lend realism, and your miniature will look exceptional after this step.

Follow the following steps:

• Take black ink and add a lot of water to it to make it very wet.
• Then wash it evenly over the miniature.
• Take a pause and look for flaws.
• Do another wash with clear water if needed.

Why do it on plastic figures painting?

The wet black ink will flow down into the minute cracks. This washing process will add prominent detail to the model. Moreover, it looks good on items like large clothing pieces. It also adds a resolution to the miniature.

Highlighting

Next, move to do the highlighting and dark lighting. In this process, you take a section of the miniature, let's say, the thigh of a human. Here you add intensity to the leg for shading. The human leg would be flesh color. So, you take the flesh color paint and add a little bit of white to it. It will make a lighter shade of flesh.

Now all you need to do is dab a bit of this lighter color on the high points of miniature's thigh. In contrary, you also do this with a darkened flesh color. Dab smaller amounts onto the lower areas of the leg. Follow this method for any larger parts of the miniature.

Detailing

As you are painting the mini, you are sure to make small errors. So now it's time that you correct them. Add any final details like the jewels on the crown or the belt. Don't forget to add texture to the base on which the plastic figure will stand.

Getting the Miniature Ready

Finish up by joining the pieces if needed. Spray the whole figure with a matte sealer. This sealer will act as a protective coat. It will keep your miniature from damage. Further, it will keep the colors vibrant for many years to come.

At miniaturelovers.com, we do plastic figures painting. You can place an order or visit our website for free quotes. We offer the best prices in the global market. For any queries, leave your comments below.

This article is written by Larry Walton on behalf of miniaturelovers.com, this is having topics on Commission figure painting, Miniature painting service, Fantasy figures painting, 54mm plastic figures and many more.