How Dry Cabinet Play Important Role in all Season?

Gradually manufacturers are getting aware of many advantages of low humidity storage offered by dry cabinets in their commercial setup. The benefit of such cabinet dehumidifiers is that these can be used for various purposes in manufacturing environment for storage of long as well as medium term inventory and short term handling of materials on production floor.

This kind of low humidity storage is found to be especially useful for storage of things like PCBs, raw components and bare boards in any manufacturing setup.

Functioning of Desiccant Cabinets

In this next section let us look at how professional desiccant dry cabinets function.

There are several auto recycling cabinet dehumidifiers which work desiccant technology for controlling humidity levels within the cabinet in a commercial setup.

Such auto recycling consist of desiccant rejuvenation by a method where dehumidification process is stopped, the desiccant material is sealed off and then a low watt heater present inside the cabinet is turned on for expelling captured moisture.

Refreshing Process

At the time refreshing process continues, some amount of moisture is likely to escape back and result in minor spike in level of humidity inside.

The amount of time it takes to complete refreshing process and how much moisture will get back would be mainly depending on how good dryer technology is. Often it is reported that moisture increases by about 4% during refreshing process.

Normally refreshing takes about 45 minutes at an interval of every six hours for recharging a saturated desiccant while some other units may take as much as 70 minutes to finish the process of refreshing.

Optimum RH Level

Many times it is seen that in any professional set up manufacturers desire optimum RH level of 1% to be maintained but that never seems to happen and levels continue to fluctuate all the time. The problem in such situation is incorrect determination of the amount of load that can be placed with any cabinet.

Thus if you want to maintain the right level of relative humidity (RH) then it will be important to take into consideration the load that can be effectively handled by the device.

Evaluating Load

To correctly evaluate amount of load in any industrial dehumidifier you need to check the under mentioned questions:

1. Will it be necessary to open the cabinet on frequent basis? It will be opened how many times every hour or in a day?

2. Is the item to be kept dry or was exposed to higher levels of RH?

3. For how much duration the item is to be stored?

4. Where the device will be located? Will it be on production floor or in inventory area?

5. At any given point of time how much inventory is planned to be stored?

Recovery Time

If you are looking to buy industrial dehumidifier check whether the device is air tight and also look into the recovery time it has. Recovery time refers to the set point to which the device returns after exposure to moisture.

If you want to purchase any of these cabinets then Origincorp.com is the best place to purchase from. They have several years of industry experience & can meet any type of requirement you may have as well as guide you about the right product to buy.

Read above article useful information & knowledge for you.