Know In Detail the Pneumatic Trailer Operation

The trucking industry is not at all easy to work at – starting from loading goods to unloading them – every factor needs utmost labor. So, when the workers from this industry can take so much load, someone should take care of that, isn’t it!! And On-Lift has done that with utter success – we have become one of the biggest pneumatic trailer operation solutions in this industry.

In our previous article, we talked about the "Big Evolution in Pneumatic Trailer Operation" where a bit of idea was given about how this operation takes place. And here we have prepared an elaborative article describing the operation procedure of the pneumatic trailers. To know that, you have to give a read to the rest of this content…

No other lifting machine is as fast as that of the automated landing gear from On-Lift. Being a time savior, it has efficiently increased the productivity time of the trucking industry. But the question is how it has done so!! And to get the answer to this question you have to know how this automated machine works:

Being a member of the trucking industry, I am quite sure that you are well aware of the Emergency Brake System present in a trailer. During pneumatic trailer operation – either landing or lowering the truck takes place with air power. The emergency brake system of the trailer delivers air power to the machine and then it works accordingly. Because of the air power, this operation does not require any other additional power and that’s why it’s quite easy to work with.

Manual cranking was never smooth as it demanded the use of almost the entire upper portion of your body; pneumatic operation is not like that – by using only the forearm and wrist, you can easily lift up or down the trailer. Take a look at this image to understand the operation best:

Additionally, if we talk about the rear stabilizer operation of this machine, you will understand that the automated landing gear from On-lift is a lot safer than any other manual landing gears. When workers load goods on the trailer, it often settles down at the dock after a certain period of time because only the air cannot keep it at the same place for long. This is how it happens:

And it can anytime injure the workers. But our landing gear has diminished that probability with the rear stabilizing operation. Here is how:

This extremely precise pneumatic trailer operation works with high durability of On-Lift’s landing gear. With a speed of 220 rpm, our creation has received the reputation of biggest efficiency and safety that too without any huge expense for maintenance. All is needed to be done is just a periodic checkup of the lubrication bowl.

On-Lift has repetitively tested the landing gear for over 30,000 cycles that too with loads and we have not failed a single time. Just like the operation of our automated landing gear is easier, you can also make the installation very smoothly in actually less than 2 hours. Because of its light weight of 10 lbs, our product is truly effortless to handle.

Well, though we have given a very small overview for the benefits our pneumatic trailer operation, you can also know them in detail by referring to our next article – "How Beneficial is the Pneumatic Trailer Operation?"

Stay tuned with our regular updates and to know more about us visit our website – onlift.com.