Signs Your Brickwork Needs Repointing or Repair – How to Tell When Your Building’s Brickwork Needs
Posted: Jun 18, 2014
Maintaining the structural integrity and physical appearance of a building’s brickwork is extremely essential. The need to repoint or repair bricks arises from a wide range of factors, from poor workmanship and weathering to negligence and even seismic movements. Although the need for brick restoration is typically evident, it’s important to consult a company about the extent of damage or deterioration, its exact cause and the right remedial measures for dealing with it.
How Can I Tell If My Brickwork Needs Repointing?
Over time, weather and natural decay cause mortar in joints to crumble and fall off, causing voids that may allow water to enter and penetrate your brickwork. To establish if you’ll need the services of a brick repointing London contractor, you need to examine your brickwork to ascertain if the mortar has extensively become loose, crumbled or fallen off.
Ask yourself: has the mortar joint deteriorated to the point of being bad? Does the mortar crumble easily when you dig your finger or a stick into it? Are there large gaps or missing mortar? If yes, then you would want to consult one of the licensed brick pointing contractors in your area. Proper repointing lasts roughly 25-30 years. So don’t forget to check when the last repointing was undertaken. It can help you determine if it’s necessary to carry out repointing.
In addition to missing or crumbled mortar, the presence of water or leaks, especially along window mouldings, may be an indication of bad mortar joints. So check if there are any signs of leaks, particularly during a storm or when it’s raining. Other signs of water damage (penetration) include: plaster cracking along certain areas, floor bulking in a particular spot and mould or mildew on the external surface.
Nonetheless, it is also worth noting that there might be water damage going on that you can’t see with your naked eyes. But if you see any of the above signs, then you should engage a qualified brick repointing London contractor to assess your brickwork further and undertake the necessary restoration measures.
Professional brick pointing contractors have extensive knowledge and expertise in repointing, as well as the right tools, equipment and technology to complete the job efficiently and safely. They can help you save time, money and your dear brickwork.
How Do I Tell If My Brickwork Requires Repair?
Brink pointing is the most common type of brick restoration. However, if your brickwork has suffered extensive damage, it may require more than just repointing. If your brick building has broken, loosened, fallen or badly deteriorated units, then you might need to hire a brick repairs Surrey specialist to carry out the necessary repair. Damaged or displaced bricks can be replaced with new units or resettled in place using new mortar. If there are no similar old units, new bricks conforming to the originals may be utilised.
For historical buildings, specialists will try their best to reuse the old units. This is because bricks production methods that were used in earlier days differ significantly from modern methods, and therefore using new units can affect the structural integrity of older buildings. Reusing old units also makes it easier to restore the old classic look of older or historical buildings.
The author is a best expertise in developing business.