Directory Image
This website uses cookies to improve user experience. By using our website you consent to all cookies in accordance with our Privacy Policy.

Fitting Tyres: Steps For Perfect And Balanced Tyres

Author: Eva Taylor
by Eva Taylor
Posted: Feb 14, 2020
tyre fitting


Tyres are parts of the vehicles that come in direct contact with the road and support the vehicle load. They help in the transmission of the braking force to the road surface, absorbs the shocks, bears the wear and tear and helps in maintaining the perfect direction of the vehicle movement. If a person wants the tyres to roll comfortably and the functions to be adequately executed, it is important to inspect them regularly and change them if needed. Changing of tyres means that it has to be removed from the rim, and this task is not similar to the task of changing wheels.

Thus it is advised that a person should never attempt mounting tyres on the rims by themselves. The perfect way of getting tyres changed is by getting it done by the experts, who make use of tyre changing machines.

Steps For Fitting Tyres

A tyre is changed when the sidewalls of the tyre are damaged, the tread is worn beyond the perfect dimensions, the tyre has a hole greater than 6 mm in diameter, or when the bead of the tyre gets deformed. The tyres are examined and, when required, are removed and replaced. Tyre fitting process is best executed by professionals and with the help of professional tools.

Tyre fitting Coventry professionals execute the following steps involved:

Get the wheels out while checking the direction in which they are rotating. If any marks of rotation on the tyres are not visible then use tape to indicate the direction.

The wheel should be positioned in the bead breaker. To hold all of it in one place, a threaded clamp should be slacked. This helps in ensuring that clamp is not going to foul the tightened rims.

To squeeze the tyre away from the rim one should wind the handle on the bead breaker. As soon as the bead starts climbing up, it should be moved around until it is completely free. A similar process must be carried out on the other side as well.

Rim protectors are put in place as you proceed with the tyre lever. All this while, put pressure on the tyre with your knee, which can be quite a task, to hold it in position.

As soon as the first lever lifts the bead, move to the next rim protector with lever two.

Once it is done on the side then a similar process must be applied clearly to pull the bead on the other side.

Identify the rotation arrow, and balance marks that have to be fitted next to the valves

The rim should be checked and cleaned up. Then a lube must be applied on the edges of the new tyre. Push the rim down by placing the tyre on the floor.

The rim should be laid flat on the floor by turning over the wheel. Then by making the use of levers, the beads must be put back in their position carefully.

Similarly, the opposite bead must also be placed in its position ensuring the balance marks of the tyre are lined up with the valve.

The tyre must be inflated with the help of a petrol station air-line till the beads pop back into their positions.

Finally, the wheel must be balanced properly.

After checking off the fitted tyre, you are good to take your vehicle on the road. The best stop for a tyre inspection, maintenance, and changing them is to look for the best tyres Coventry has ever had, with our collection at 0.


Tyres play a vital role in ensuring the safety of the person on the road. Tyres are the direct link that a vehicle has with the road and thus, are subjected to a lot of pressure. It is necessary to inspect them regularly, maintain them and, if needed, get them changed as soon as they wear out or get flat. They must be changed and fitted by people who are experts in doing these processes with perfection.

Rate this Article
Leave a Comment
Author Thumbnail
Please or Join to add a comment.
Author: Eva Taylor

Eva Taylor

United Kingdom

Member since: Feb 11, 2020
Published articles: 2

Related Articles