What’s the Working Process of direct to film Printing?

The development of direct to film Printing as well as control technology has made DTF printers much faster, more dependable, and less expensive to use.DTF printing can make the network's virtual pattern into a real pattern.Additionally, it is low-cost, small-batch, quick-responding, high-quality, and environmentally friendly.When compared to more conventional methods of production, the DTF printer has the clear advantage.Therefore, what is the DTF printing procedure?The pattern that needs to be hot stamped must first be printed using DTF Printing.Naturally, the best course of action is to process the image and print it onto a transparent bottom document.We must draw through strokes using AI, CDR, and other mapping software if the original image's resolution is too low.The goal is alright, straightforwardly use PSD to eliminate the foundation with the enchanted wand device.It is important to note that this transparency ought to be completely transparent.At last, heat the powder in the stove at a temperature of around 110 degrees.Next, try directly saving PSD files in CMYK mode using AI.The use of PSD software to add white ink channels to the image is the next focus.Open the transparent typeset bottom file with PSD.To view all graphics, hold down the Ctrl key and click the graphic thumbnail in the layer panel.The Lasso and Pen Tools, among otherscan also acquire this option.Then, at that point, select Change under the menu to grow, top in 1 or 2 in the pop-off interface, and extend the determination a smidgen.Then, at that point, select New Spot Variety Board in the upper-left corner of the channel board.Montane can be used to open the TIF file, modify the print settings, and then output the print file.The printer first prints a color map on the special release pet film before printing a layer of white ink on top of the color map during the printing process.After that, a pressing machine is used to place the printed pattern and garment on a press.To begin with, cut the hot stepping painting, and change the indoor regulator and clock of the squeezing machine.The garment must be placed on the silicone board in the following step.After that, place the hot drawing on the garment flat and press down hard on the handle until it closes completely.Lift the handle back into place when the press buzzer goes off.The final step removes the pet film, finishes the ironing, and displays the hot painting effect.

Caren pink Sublicool, a Chinese professional Dtf / Dtg/ UV printer manufacturer, we have rich export experience, and our customers and distributors are worldwide. web: www.sublicool.com Email: sales@sublicool.com