Easy way to reset cisco router password without losing your configuration

"I forget my cisco router password. Can someone give me a suggest to reset cisco router password.Did you know you can change them without losing your configuration?"--From yahoo answer.

Along with a Cisco router, you decline need an Ethernet wire or system wire before reset password.You first need to hook up the Cisco router with a system or an Ethernet wire. In case of system wire, hook up it to the system slot of your notebook or computer. You then have to web link it to the system slot on the Cisco router that flows Console, (Cisco 2600 Sequence Electrical circuitry and Setup) in red composing.

Moving to phase second, you are required to use the system slot to accessibility the CISCO router via the Super Terminal system. This system comes preinstalled with the Windows based pc. From the Begin selection, choose ”All Programs” ---“Accessories”--- “Communications”; and simply select the quick way to Super Terminal.

The following slot configurations need to be used when encouraged by Super Terminal: BITS per second: 9600Data bits: 8Parity: NoneStop bits: 1Circulation control: None

As a substitute, you can open a control immediate screen by choosing from the Begin selection. Type “cmd” in the space offered and media ”Enter”. In the control immediate, get into the control “telnet”; followed by the IP deal with of the router. An example of the control range is: C: telnet 123.156.204.12.Command usage-Prior to any changes, get into the blessed function of the router and use the following control. You also need to make sure that the “Router>” is the standard router immediate for a CISCO router.

-Once you get into the allow control, it will change your CISCO router immediate to:Router#In order to get into the configurations function of the CISCO router, the following control needs to be used:Router#config Once you efficiently get into the configurations function, the following concept will be received: “Enter configurations orders, one per range. End with CNTL/Z.”

After you get into the configurations function of the CISCO router, the following immediate will be visible: Router (config)# Password Setting

Now you need to set the allow code by using the control “enable password ”;. For example, for the code “Change me2”, the control will be as follows: Router(config)#enable code Changeme2It is essential that you use a powerful code platform when establishing the allow code. The allow code is an exclusive terminal code that defends entry to the router over a system interface. This code is noticeable in the router configurations and is not saved secured on the CISCO router.We now come to the last phase of establishing the code. You need to set the allowed key code with the “enable secret” control.

For example, for “Newpswd4” as the code, the control will be: Router(config)#enable key Newpswd4

While creating code configurations, it is recommended that you use a different protection account details for “enable secret” and ”enable password”. The allowed key code is more protected and secured than the allow code. One can also not view the allowed key code in the CISCO router configurations.

As another popular use rouerter, Cisco2911/k9 has attacted lots of attention to help users solve their network problem.