Industrial Fall Protection Systems At Work Sites – The Responsibility Of Everyone Involved
Providing fall protection for construction workers operating under dangerous and inappropriate conditions is a must. Most deaths and injuries occur due to neglecting the safety of oneself and not using fall protection products even after knowing the dangers of working in an unsafe environment. Other injuries are caused by presence of useless construction debris on site which results in abrupt tripping and falling over. Therefore, along with efficient and honest use of fall protection safety, one must consider every factor which might bring harm to the worker on site.
Use of fall arrest at heights unsafe for working will reduce the risk of falling. Following the OSHA fall protection guidelines will keep a check on the safety issues concerned with dangerous working environments and keep the construction company from getting sued as well. Keeping the floor clean and dry, clearing all the construction debris to avoid falling over, use of guardrail systems to demarcate prohibited areas and spreading awareness among the working staff about the importance of wearing safety gears are some of the guidelines to avoid deaths and casualties.
Apart from provision of safety gears and systems of roof fall protections, it is required that the workers maintain their mental and physical balance as well. Some accidents are also a cause of anger and reckless behavior of workers. There are numerous companies which deliver fall protection services. For roofs, a variety of fall arrest systems are made available by several companies. One can install fall arrests for heights that become life threatening, this way safety is ensured. The other way is use of guard rails, which is the permanent solution to fall protection. Guard rails let you move freely on the roof as they don’t need any anchoring.
These products are available in a wide range of varieties from different companies. This provides the buyer with flexibility in selecting products to meet cost effectiveness. According to OSHA guidelines, one must also provide fall protection over dangerous equipment and machinery, regardless of the height. Apart from these preventions, horizontal lifelines can also be used. These are protections in which one part is attached to the building and the harness is attached to body of the worker to arrest a fall. These lifelines are more cost effective as they require less material but for complete safety, one should get the best quality product as well.
When working on site, one must take care of all the equipment like harnesses, helmets, tools etc. and clear the unwanted material off the floor. The floor should be kept dry and should be washed with soap to avoid slippery surfaces. It is upon the construction company as well as the workers to maintain a healthy and secured environment for working. In case of a death, the worker’s employer will have an obligation to provide compensation for the deceased’s family, depending upon the local laws. Therefore, it is better to always equip your workers with the best and safest working environment in order to remain out of court and to satisfy the worker’s security concerns as well.
About The Author
Brent Owens is a safety expert who works hand in hand with many construction companies across the country to ensure that employees are always protected while at work. He recommends Caisafety.com as the best name to trust for high quality fall protection systems.