Fusion series controller
Fusion series controllers are the most powerful relay controllers designed and
developed at "controlanything.co.in". "FUSION" as delineated in the name of the controller
is truly justified as in this controller 3 separate relay controllers are built into a single device.
A perfect amalgamation of three relay controller technologies that are TARALIST (Time
Activated Relay List), Reactor and ProXR advanced provide an utmost solution in the control
world. Each controller has the ability to control relays in very different ways. Specializing in
autonomous and computer controlled switching applications, fusion controllers can be
operated by themselves or can be computer controlled from anywhere in the world.
Taralist is used to control relays based on time schedule. Time schedule can be designed
using the Base Station Software and loaded into the controller. Each event in the list can be
tested by simulating the time changes and monitoring the changes in the relay state. Reactor
is used to control relays based on sensors. It also works with remote access to read sensors
connected nearby with wireless Fusion controllers. Overriding the control of reactor and
taralist relays, ProXR Advanced provides computer control of relays. It is our fourth
generation command set for controlling relays. The most influential platform in the the world
offers more capabilities with fewer commands than ever before.
Fusion controllers are featured with relay controllers incorporated with programmable I/O
analog to digital convertor, UXP expansion ports and I2C expansion ports. It can be
configured using Base Station Software and works on API command sets at 12V DC power
supply. Base station software helps to configure fusion controller and to explore fusion
features. This methodology significantly reduces the amount of information that must be
reviewed, making learning and integration much faster. Base station software is integrated
with Comm operator. For speaking to the fusion class controller at the command level,
Comm operator is an essential tool. It allows the user to send and receive numeric based
commands to a fusion controller for activating relays and controlling various functions.
Base Station can configure a fusion controller over the internet from anywhere in the world
with the help of API. Data can take a while to travel across an internet connection and can
arrive at a device at an unpredictable rate. API has the necessary routines in place to
accommodate direct communications from software of the user to a device anywhere in the
world, regardless of internet connection speed or delays between packets. API also has
numerous benefits in wireless and Mesh Networking applications, where data packets may be
lost. Fusion controllers allow users to develop in API format, which has a real-world, long-
term benefit for all communication technologies. In depth knowledge of API, allows the
users to use these boards anywhere in the world over an internet connection. In applications
that do not require an internet connection, API greatly improves communications speed and
command processing reliability. All communication technologies will benefit from API with
regard to speed and reliability.
Fusion controller’s high adaptability to the various communication technologies like
Ethernet, web-I, Bluetooth, Wi-Fi, 802.15.4 wireless etc gives it an additional edge.
Embodied with so many features fusion controllers are a full-fledged autonomous control