Trailers Sydney – How to Adjust Brakes

Maintaining your trailer brakes usually includes three different functions: inspection, cleaning and adjusting. Inspection should be performed more often to verify the safety of your tires. If your vehicle is new or under warranty, always inspect the brakes before you tow.The adjustment of the trailer brakes is a must and should be carried at least once a year. If you are travelling more frequently the number of times you need to service you trailer will certainly increase. Every person with average mechanical skills will be capable to handle the adjustment of the brakes. The most important thing when towing is to protect the vehicle, the goods and to protect yourself of course. First of all you will need adequate tools to access the brakes which can be found at most tool stores. Besides, you will also need a jack to lift and hold Sydney trailer during the adjustments. The following step is to perform the setting of the trailer mechanism.

Second, you need to block the trailer tires on the opposite side to prevent any movement. To begin with you must find a small rubber plug at the same brake to access the adjustment part. This is the most important moment and you will spend plenty of the time on adjusting and manoeuvring the star wheel. On most trailers you would pull down on the tool handle which levers on the bottom of the hole and turns the star wheel up (as you are looking at it from the back of the wheel.

The next thing is to turn the adjuster until the brake locks up so you can no longer move the wheel by hand, while the brake shoes are in the right position. The star wheel should click and afterwards the wheel should start spinning without restrictions. You will only notice a slight scrapping noise from the wheel which is quite normal during this procedure. The following steps remain the same for all the wheels on the trailer Sydney. The procedure is quite long and time consuming, but the effectiveness of your trailer depends mostly on how frequently you adjust the vehicle brakes.

Before getting out on a road, practice; turning, stopping and backing your trailer in an area away from heavy traffic such as in a large empty parking place. Because trailer brakes are necessary, you need to take care on how they work to if you want your trailer to function properly.

If you are moving frequently and you transport items very often than look no further when purchasing a box trailer. Whether you are looking for an open or enclosed trailer you can find everything you need to secure your goods. Before purchasing a Trailers Sydney be sure to contact our team to help you find a vehicle with proper widths and lengths that will meet your transportation needs.