Jbl prx715xlf

INTRODUCTION

The PRX715XLF extended low frequency subwoofer was designed and engineered

to provide sub bass frequencies with accuracy and power. Used as a single sub

in a sub/sat system or in multiples as part of a scalable, large format sound

reinforcement system, the jbl prx715xlf performs with exceptional efficiency and control.

Features:

? Maximum SPL Output 131 dB Peak

? 15" Differential Drive low-frequency driver for low-distortion and higher SPL

? 1500W highly efficient Class-D amplifier

? DSP input limiter circuit, crossover, dynamic limiting, and component optimization

? Professional XLR-1/4" combination inputs and XLR loop-through

? Top panel M20 pole mount socket for sub/satellite configuration

? Injection molded handles with comfort rubber grips for easy transport

? Lightweight poplar plywood cabinets made structurally sound with tongue and

groove joints and protected by JBL’s tour proven Dura Flex finish.

Application:

The subs are stackable and lightweight ensuring quick set-ups and teardowns. And due to

their rugged construction are perfect for AV rental inventories. With a pole receptacle

(that accepts a SS4-BK or SS4-BK24) on the top panel and integrated stereo pass-thru this

is the most powerful low-frequency complement to the PRX full- The range systems.

addition of a polarity reverse option further enables system optimization.

The PRX715XLF is a high performance self-powered subwoofer system. The

PRX715XLF is comprised of a powerful 2275H Differential Drive dual voice-coil

and magnetic gap, woofer driven by a 1500 Watt Class-D power amplifier.

Sophisticated DSP is at the core of a fully featured input section, providing user

selectable cross-over functionality, polarity optimization, protection, dynamic limiting

and discrete component optimization.

All PRX700 cabinets are built from a combination of 25 mm (on the top and

bottom for added rigidity) and 18 mm, strong, light-weight poplar plywood made

structurally sound with tongue and groove joints. All PRX700 Series cabinets

are protected by JBL’s tour proven Dura Flex finish. Grilles are made from

dent-resistant 16 gauge steel and handles are made from light-weight glass-filled

nylon for added strength and durability.

The amplifier input panel offers stereo inputs with XLR or ¼ inch jack

compatibility. A user selectable crossover ensures a smooth transition to full-range

system connected to the stereo outputs. Signal present and limiter lights indicate

the system status and assist in setting the optimum level via the level control knob.

Specifications

System:

System Type: Self Powered 15" subwoofer

Maximum SPL Output: 131 dB peak

Frequency Range (-10 dB): 37 Hz - 113 Hz

Frequency Response (±3 dB): 44 Hz – 91 Hz

Input Connectors: Two Balanced female XLR/ 1/4" combo connectors

Input Impedance: 20K Ohms (balanced)

Signal Indicators: Limit: Yellow LED indicates peak output has been

reached and DSP limiter is acting

Signal: Green LED indicates signal present

Power/Standby: Blue indicates system has power and ready to pass audio, Red indicates system has

power but is in a power saving mode and will not pass audio.

Dynamic Control (Input): DBX Type IV limiter circuit

Internal Crossover Frequency: 100 Hz DSP

Loop out Crossover Frequency: 120 Hz analog 24 dB filter slope.

Amplifier:

Design: Highly efficient Class-D amplifier

Power Rating: 1500W

Speaker:

LF Driver: 1 x JBL 2275H 15 in woofer

Enclosure: Rectangular, 18 mm & 25 mm, plywood

Transport: 2 x injection molded handles with backing cup

Finish: Obsidian Dura Flex finish

Grille: Powder coated, Obsidian, 16 gauge perforated steel with acoustical transparent black cloth

backing.

`

Dimensions (H x W x D): 547.1 mm x 445.0 mm x 580.0 mm

(21.54 in x 17.52 in x 22.48 in)

Net Weight: 25.4 kg (56.0 lb)

Gross Weight: 30.3 kg (66.8 lb)

For more information, or to bass reflex subwoofer contact us at http://yourproequipment.com/live-sound/subwoofers.html