Things You Can Do to Prevent Windows 8 PC Crashes

Are you fed up of constant Windows crashes that force you to perform improper system shutdown to initiate the restart, which usually cause data loss? Not to mention about the frustration and constant disturbance that Windows crash brings along.

If your PC crashes consistently, that means something is seriously wrong with your computer. It is not probably a Windows 8 problem, because windows 8 runs stable on other computers.

Following are some of the quick tips that can help you in preventing the unexpected Windows 8 PC Crashes:

Check for Hardware conflicts: Many blue screen errors are a result of hardware and installation conflicts. All of your system's components consume IRQs (interrupt request channels) when installed, and every device requires its own channel to function properly. When two devices share the same channel and are used simultaneously, a crash may occur.

Go through your Device Manager, and look for any devices marked with a yellow exclamation point. These are the ones with issues, and can usually be fixed with a driver update. Just search your device manufacturer's website for the latest driver software, or, in a pinch, reinstall the offending hardware itself.

Does Your PC Has Bad RAM? Bad memory is many times the reason of blue screens and failed system boots. Fortunately, however, your RAM modules are some of the easiest components to check and replace.

First, use the software utility Memtest86+ to ensure if really your RAM is the cause of the problem. If errors arise, you next need to determine exactly which memory stick is to blame. To do this, remove all the sticks from your system—save one inserted in the primary memory slot. If the system boots fine and no errors are detected in Memtest86+, continue testing in the same fashion—one stick at a time, inserted in the primary slot—until the system fails to boot or Memtest86+ indicates problems.

Eventually, you'll nail down exactly which memory module is causing trouble, and then you can replace it with a fresh, clean stick (just make it fully compatible with your motherboard and other sticks of RAM).

Avoid Heating of the System: Computers usually get hot if used for longer hours. We know this from the loud fans bolted inside our desktops, and the alarming burning sensation we feel on our legs after using a laptop for too long. Everything inside a PC generates heat, and heat can cause components to become unstable and crash your PC. Indeed, computers are designed to crash as a last-ditch effort to protect their own internal components from permanent heat damage.

If you suspect your PC isn't effectively dispersing heat adequately, first check to make sure all your fans are spinning properly. If one isn't moving, or appears to be spinning abnormally slow, check its connections to make sure it's properly powered. If all appears fine, but the fan still isn't doing its job, it's best to replace it. Next, make sure that all of your PC's vents, grates, and filters are unhindered by dust, pet hair, and other gross materials that prevent proper airflow.

Run the Disk Defragmenter: Your hard drive can become a bit more fragmented—and unstable—every time you save a file, install a program, or delete something. Not only it slows down the hard drive, but it can also give trouble to your OS when trying to find necessary files to function. So your system will eventually give up and crashes eventually. Defragmenting your PC is as easy as pushing a button. Run the Disk Defragmenter in your System Tools every week or so to keep your files straightened out.

Check for Viruses: Malware and viruses are significant causes of blue screens. But, luckily, the solution is simple. Start up your trusted antivirus program, make sure it's up-to-date, and give your system the most robust scan available.

Starting in safe mode (press F8 while the computer is starting) is an easy way to go behind a virus' back to destroy it.

If the virus has disabled your ability to start up your antivirus software, then try restarting the PC in ‘Safe Mode’ by pressing ‘F8’ before the Windows logo appears. Safe Mode will disable any extraneous programs and drivers from launching, and allows just the core operating system to load. Once in ‘Safe Mode,’ you should be able to run your antivirus program, and complete a thorough scan from there.

If you take care of the aforementioned things, then you can actually avoid the crashes in Windows 8, blue screens, failed boots or frozen system. All you need is to be bit alert and protective towards your Windows 8 to run it smoothly.

About the Author: Hi! I am Brook M. Perry, a prolific blog writer and keen author of articles related to pc tuneup and solution for issues related to computers and mobile devices. Being associated with the reputed best pc tuneup service provider Qresolve, I have resolved thousands of tech issues for our customers from worldwide. Computer online pc repair My areas of interest are PC security, endpoint security system, router support etc. You can follow me for my useful remote computer support articles on Ezine and other article-oriented websites.