Crucial Tips for Maintaining your LED Headlights for Cars

Author: Justin Hartenstein

Can you see the animals crossing the road when you are driving at night? Or have you been missing the potholes while driving on the dark alleys? Needless to say that you are having a visibility problem while driving but what are you doing to improve the situation? Before visiting an eye specialist, you must take a look at your car lights. Car maintenance is not just about the car parts but also about car lighting. Poor lighting results in visibility issues. Hence, maintenance of automotive lights is crucial to safe driving conditions.

Using LED headlights for cars is not enough. You have to regularly maintain them so that they function with equal intensity and enhance your driving experience. If you regularly maintain your car’s headlights, you will get the following benefits:

  • Lowered auto insurance premiums.
  • Increased car resale value
  • Avoid fatal accidents

    • Since you invest so much amount of time, effort and money in your car, why not take out a little time to maintain this prized possession? Here’s a list of maintenance tips that will ensure ahigher quality of lighting from your LED headlights and at the same time, enhance your car’s performance.

    Yellowing/ fogged lenses

    You must have noticed that your car lenses to become yellowish and dull. This is the effect of being exposed to the sun’s ultra-violet rays for a long time. The car lenses are mostly made up of polycarbonate material which is often oxidized by external heat. This leads to the yellowing or clouding of lenses. What you need to do is polish off this colored layer from the affected parts of the lens. You should use firm yet gentle strokes on the lenses. After doing so, you should apply a UV resistant protective coat.

    Misalignment

    The alignment of the headlights is continuously dislodged while driving in off-roads. These are not easily detected as they are not outwardly visible. So, you have to constantly keep a check on the alignment of your headlights and fix it as and when needed.

    Dimming

    The purpose of LED headlights for cars is to get intensified and bright beams of light. When you start noticing that the effect of the lights is diminishing, you should immediately replace the entire set for uniform illumination.

    Flaking lens

    Sometimes exterior lights tend to peel and flake after a few years of rigorous use. This exposes the bulbs to the elements and increases chances of physical damage. It is recommended that you replace the surfaces as soon as possible to avoid electrical repairs.

    Scratches on the Surface

    You might also notice scratches on the surface after a few years of continuous use. You can remove the scratches with coarse and fine grit sandpaper. The imperfections are trimmed off first with the coarse grit and then fine grit is used to sand off the residue so as to give it a smooth and even surface.

    Condensation and surface breach

    You have to particularly take note of condensation and surface breaches as these kinds of repairs are fairly more expensive. If you do not fix them on time, it runs the risk of electric system failure.

    The reason why we need properly functioning LED headlights for cars is that these are not merely lights that adorn the car’s exterior appearance but they are actually like the eyes of a car; they provide the illumination with which a car moves forward on the road. If you have correctly upgraded headlights, then it helps you to prepare for the obstacles on the road, it alsogives you enough time to react to the hindrances and accordingly make a sound judgment.