Choosing The Best Coating For Your Concrete Floors
Why floors need protective coating material?
Floors are prone to all types of abuses ranging from thermal shock, chemical attack, impact and abrasion. Concrete floors are not capable of facing such damages every day. The reason behind this drawback is that they are porous and will develop dust owing to wear and tear or abuse. The major problem that these concrete polishing solutions experience can be easily prevented by opting for a protection of any kind, irrespective of the region where it is located. The major issue underlies in determining the protective material type to cater to the varied conditions where the premises is located. It is very important to choose a durable coating for protecting the floor as it would provide protection in the long run and would improve the asset value immediately.
Tips to choose best concrete floor coating
You must follow certain steps to choose the best flooring material for your needs.
Evaluating the floor surface
The floor specialist would help you in this process as they would prefer to go for a coating that would last for many years with minimal maintenance. The surface should be very clean structurally and should not be contaminated by a foreign material which can hinder its bonding with the concrete stripper. Also check whether the surfaces have an uneven look, spalls or cracks as the coating might slope to one side offering it a lop sided look. If the floor is uneven then you must ask the professional to level or patch it while making sure that the material they use is compatible with the coating later on.
Preparing the surface
Preparation of the surface is the significant step in the process of installation as it is very crucial for long term performance. The type of coating you select will have an influence over the surface preparation. Based on your choice, the coating can be a thick or thin film. Preparing the surface properly will prevent it from having a thick profile after the application of the coating. You must also remember that new concrete floor would also demand perfect preparation similar to old floor. Removal of curing compounds and perfect profile plus roughness will also be performed.
Analysis of floor performance conditions
Generally, four major factors of abuse would decide the need of your floor.
- Exposure to chemicals: Concrete floors can be damaged to severe degrees based on the variety of chemicals used. Spillage and splashing chemicals are less harmful to the floors than constantly immersing it.
- Abrasion: The traffic volume in the premises and the amount of wear and tear will affect the life of the concrete flooring. It is also important to note whether the area faces rubber wheeled or steel wheeled traffic. The area that is exposed to steel wheeled traffic would need very special treatment to deliver long term service.
3. Impact of vehicles: Heavy vehicles and vehicles with heavy loads would have a direct effect even on a thick floor. Choosing the right kind of coating with a thicker profile with the help of a best concrete polishing machine will help in lowering the damage caused by such impact.
4. Thermal shock: Fluctuations in the temperature or thermal shock can be a significant condition that needs to be considered. Thermal shock occurs during the process of steam cleaning the floor surface and will trigger the loss of bond owing to thermal expansion when the flooring is not selected properly.
After analyzing these factors that can affect the floor conditions, you can choose the best flooring options which will last longer and give you the desired performance in the long run.