Methods To Repair & fix toilet leak

Dealing with Cracked Ceilings or Walls of a Leaking Bathroom

Water can be devastating sometimes. It is a problem to see the damages water delivers in an otherwise amazing house. Among the damages, the cracking of ceilings or walls in a bathroom is more normally seen or heard of. The condition worsens when it rains as we can pretty much see water seeping through the cracked areas. If the situation is neglected, the high wetness may form a comfortable breeding ground for bacteria, letting mould to increase on the surfaces. Prompt water leakage treatment is therefore needed. The following steps will indicate how to fix a cracked ceiling or wall of a leaking bathroom; or in a simpler term it guides you on how to fix toilet leak.

Step 1 : Cleansing the surface

The earliest move to fix cracks or more notably to repair water leakage is to knock off the peeling parts nearby the cracked area. It is encouraged to use a putty knife or a paint scrapper to ease the removal. If a little mould has developed in your bathroom, you will need to have them removed but it might be a little annoying as you need to wear on gloves and hold your breath while in contact with the mould. Should where mould has taken up a large area, it is wise to leave the task to pros.

Step 2: Putting on drywall compound

Once the cracked area is cleared of scattered pieces, you may now put on drywall compound (some term it joint compound) to fill up the cracks as an strong protection against water leakage. You should flatten the edge with your paint scrapper to avoid uneven surfaces that might affect the appealing value of your bathroom. Leave the compound to dry before you lightly sand it with a sandpaper to smoothen the surface. You may then apply a second layer of the compound, now covering a slightly wider area. Similarly, it is vital to wait for the compound to dry before sanding it again. If you would like to strengthen the patched area, you may add an additional layer of compound. Once the final layer is dry, you basically have the water leakage repaired.

Step 3: Painting it up

It would not be fascinating if you are to leave the patched surface in its original greyish colour, contrasting from the colour of your bathroom. It is thus wise to paint it up. For a long lasting solution, it is wise to use SurfaPaint ThermoDry Interior from Nano-G. It is a eco-friendly paint with water sealant and thermal insulating properties. After painting the patched area, you have given ample protection against water leakage and now you are done with the task.

This article operates as a valuable tip to lead you on how to fix toilet leak in particular on cracked ceilings and walls. If the condition of your bathroom is badly damaged, it would be advisable to hand your case to experienced personnel for a better water leakage solution. After all, they know it better than the average Joe.