Maintain Your Wooden Floor Properly To Retain The Shine And Sheen

Author: Phillip Jackson

There are different types of wood floorings which you can have in your house. All of it has its benefits and drawbacks but to keep it beautiful and prevent from any damage, you must take proper care. Floor sanding is one of the ways which needs to be done to keep the shine apart from keeping it free from any other damages. You have to take some precautions before starting the sanding job to have the desired result. Depending on the type of the floor, the process may vary a bit, but the basic requirements and techniques remain more or less the same.

Ways To SandWhatever be the type of wood used, sanding is very important. For doing it yourself, you have to know the correct ways to sand a floor . The direction of sanding a floor depends on the condition of the floor. Your floor can be flat or uneven and accordingly you have to change the direction of sanding. If it is flat, then it may be useful to move the sander up and down the grain of the board, but you must start across the grain if your floor is uneven or has a heavy coat of paint or varnish on it. Remember not to do it at right angles to the board as it will damage the board completely.

Process And ProtectionThis is very important while you want to have your house sanded. Keeping your sander at an angle of 45 degrees, you must cross a room in one direction and then move to the other side to finish along the grain. You must also start with coarse sandpaper at first and reduce it gradually as you carry on, ultimately finishing the process with the finest grade of sandpaper. Remember that it is a very noisy, dusty and messy job and needs adequate protection to be taken beforehand. Protective clothing, respiratory masks, and ear protectors are essential and keep your room well ventilated by opening the windows.

Difference In Floor TypesWood floors look elegant, and you can have a variety of Luxury Wood Floor In London. You can have hardwood floors, soft wood floors, engineered wood floors or even laminated wooden floors for your home. Apart from solid wood, you can use laminated wood which is made up by compressing fibreboard planks and covering it with a photographic image of stone, wood or tile with a protective layer on top. These are cheap, hardwearing and have a wide variety. Engineered wood is made up of multiple layers of wood glued together. These woods are more stable and less prone to any changes caused by temperature and humidity.

Few Prior PreparationsYou may need different types of sanders like drum sander, corner sander, and edge sander. But before starting take a proper look at the floor and nail down the loose boards and clear away the protruding nails, if any. Check the sand papers now and then so that you get the best result by keeping the paper taut. Unplug the Sander every time you do so. Use the Sanders cautiously and after finishing vacuum clean the floor to have that beautiful glaze on your floor.

Resource Box: If you are looking for wood flooring or Floor Sanding In North London , visit http://gawoodflooring.co.uk/.