Various Epson Ink Cartridge Problems | WeFix365
The biggest nightmare for any printer user is the fault in the printhead. The replacement cost of the printhead is so much that people either keep their printer is trouble as it is or sell it at low cost. Have you also faced similar issue prior? If so, then have a look at some of the tips associated with maintaining and troubleshooting printhead problems. The Epson printer support of WeFix365 provides a comprehensive report on how to check for the problem, how to troubleshoot it and what precautions one should take to avoid any such printhead problem in future.
Firstly, let's get insight into Epson printhead working. All Epson Printers have inbuilt printhead which allows you to get print using different color nozzles. Even when you have used genuine and branded printhead after years of use. You might find a few or many nozzles being blocked. At this stage, a proper cleaning cycle won't help much in resolving the issue. Your problem might take an adverse effect if you are not using your printer regularly. If the printer is used once in a while or when you are in the situation of changing ink cartridge then the problem of ink cartridge might arise. Not just cleaning the printhead will solve the problem. Always remember that cleaning the printhead might reduce ink levels in the printer, making the situation worse.
Reason- The reason of printhead failure is air in the nozzles. Many printer users wait for the time when the printer starts to spit out blank pages. They do not pay attention to the ink level error message and continue to use the printer until and unless above mentioned scenario does not come up. Now, you can easily fill your printer's stomach with ink and the chances are bright that any air in the nozzle might disappear but sometimes the air is left in the nozzle causing trouble to printhead. Also, the problem of ink spillage might also occur, smear the entire printhead causing blockage to the nozzles. As mentioned earlier, the more cleaning you do the more ink is smeared on the printhead. After many cleaning rounds, the ink might also dry up causing more worse problem to printhead.
Solution- The only solution to this problem is to either ask for technical support service Epson printer or remove all the dried ink from the printhead. Just remove the ink cartridge and give your nozzles a quick wipe with the damp paper towel. Never use any liquid agents or any other cloth to clean the nozzles, this can further cause damage to the printhead. You can put a small amount of ink out of the nozzles with a priming clip. It takes only a couple of seconds to remove the excess or dried ink from the printhead and can also clean the air stuck up in the nozzle.
Cautionary- Epson printheads are permanent and cleaning the excess ink off is not simply a matter of giving it a wipe. So, neither it is the problem of the cartridge or of the printhead. This is a manufacturing defect from the printer producer. The best cautionary is to never do more than three cleaning processes for any Epson printer problem. The longer cleaning cycle takes out more ink causing the ink to dry up or the ink gets smeared over the printhead causing a blockage. If the printhead is not cleaned up then take up to 10-page prints to clear the printhead. Then after that, you can continue with the cleaning process.
If the problem prevails then ask for expert advice from Epson printer support of the above mentioned company. They are available 24*7 over the toll-free number and can be reached easily. The services rendered thus are high in quality and low in rates. So, get in touch with a specialist before you are on verge of throwing or selling your printer.
Summary- This article illustrates the steps involved in troubleshooting epson printer ink problems in most effective way.