Choosing Good Quality Tires for Your Heavy Vehicle

Heavy vehicles are required extensively across the construction industry. Those who have seen these machines in action will know that most heavy vehicles are required to work on unstable earth and uneven terrain. For this very reason, it is important that these machines have a good grip on the ground, remain stable and provide easy maneuverability and control to the driver. This is accomplished by selecting good quality tires for your heavy vehicle. In order to prevent mishaps on site and prevent delays, it is necessary to consider the following points to judge the quality of a tire.

Tread depth

It would help the readers to know that the law provides for fixed minimum tread depths of tires for different kinds of vehicles. For vehicles exceeding 3.5 tons gross vehicle weight, minimum tread depth required is 1-2 mm, depending upon location, in a continuous band. A good quality tire would match the requisite standards of tread depth. Therefore, while selecting a tire for your heavy vehicle, make sure to pick out one that confirms to mandatory standards.

"Re-groovable" tires

These are special kinds of tires which are labelled "Re-groovable" on the sides. They have an additional rubber layer inside between the grooves and the belt. This helps to extend the life of the tire once the grooves have worn out, by allowing you to re-groove it instead of getting it replaced. This is highly economical for the heavy vehicles that are in frequent use which means that its tires are being subjected to a lot of wear and tear. When you select a tire for your heavy machine, look for this option.

Wet Grip Braking

This quality determines how well the tires will allow a vehicle to brake on wet surfaces. There are times when your heavy vehicles have to operate in the rains. A good wet grip allows operations to run smoother without an occurrence of any skid. It is recommended to get tires with good wet grip braking to ensure smooth and safe operating of the vehicle.

Fuel efficiency

Although indirectly related, tires have an impact on the fuel efficiency of heavy vehicles. High-friction tires will result in the engine having to expend more effort in moving the vehicle, leading to higher fuel consumption. An efficiently designed tire will strive to achieve fuel optimization. Although it is difficult to measure this parameter while making the purchase, reputed brands in the industry can be trusted to produce efficient tires.

Stated above are the few points on quality of tires which you can use to gauge and judge your new purchase. The tire of a vehicle and its quality have a long-term impact on the upkeep of the machine itself. It is for this reason that it is necessary to select the best quality tires for your heavy vehicle. Use the guide above to make a selection.