Bay Windows - how to install them

When it comes to home repairs, one of the better investments is to replace older windows with new ones. Not only does it make the house look nicer, but it can also save money by having better insulation. In the case of replacing bay windows, this window replacement is a bit different from traditional window replacement. Let's take a look at how to install bay windows.

Bay windows can make a room feel much larger and also make it more inviting. This is a solid advantage to keep in mind, especially if you are no fan of house clearance. There are choices in how far you want the window to come out from the house. Options include 10, 30, or even 45 degree angles for the window. Sometimes people also may refer these types of windows as bow windows.

So the first thing you need to do is remove the old window. That is one job property clearance experts can greatly help you with. In the event that this is a brand new window, you will need to cut and frame an opening. Then make sure construction waste disposal is effectively executed. Once this is done, you will then need to position the new bay window in the opening. This will ensure you have the correct measurements and that it fits snugly. When accurately in place, you will then need to level it and secure it by using shims or jams. At this point, you may also want to make some temporary wooden supports and place them underneath the bay window to hold it securely.

Now that the bay window is in place, you will have to frame out a roof and bottom. For the roof, it is easier to pre-construct the roof and then install it on top of the window. Make sure you weatherproof it properly with drip caps, flashing tapes, roofing felt, and asphalt shingles. Sometimes you may find these materials at unexpected place; for example a junk pile after a loft clearance session. The other easier option is to purchase a ready-made roof.

For the bottom of the bay window, you have a couple of options as well. The simple solution is to trim it out nicely and put some decorative wooden braces to help for support. The other choice is to build a wall out the entire way down to the ground. If you choose this, make sure you insulate that empty space enough. This is a daring endeavour, but one that will definitely look beautiful after the building junk removal is complete.

On the interior side, make sure you insulate the space between the wall and window. Spray foam is probably the best choice here. This will form a complete seal and help to prevent any heat loss as well as keeping the cool air inside during the summer months. Once this is complete, you can finish up the interior trim and conclude the process with builders waste clearance.

That’s all there is to it! If you get in a little over your head, you can always contact your local handyman.