This Guide Can Help You Fly An Airplane Confidently!

Author: Lindsay Green

Flying an airplane does require a thorough training and pilot’s license. However, if you are looking forward to flying an airplane, you need to be well versed with several aspects of the control and flying mechanism of an airplane. Flying an airplane involves the learning concepts of different control devices and measurement devices like a speedometer etc, which are an integral part of an airplane.

Here is a guide on how to fly an airplane:

Learning the concept of control and controls involved in the process

There are several controls available in the aircraft.

  • Aircraft Tachometer: It measures the engine speed and defines the speed in knots
  • Speedometer: The speedometer is used to measure the airplane speed and displays it in knots
  • Altimeter: It is used to measure the height of an aircraft
  • Vertical speed indicator: It indicates with what speed you are either climbing or are descending down
  • Turn and Bank Indicator: It is a dual instrument, which indicates what the rate of turn is. It also indicates if you are in a coordinated flight or not! It is also known by the term needle ball or turn and slip indicator.

Learning the concept of taking off

Taking off also requires the permission of the relevant department in control. Here are some take off guidelines:

  • Make an adjustment in the flaps to around 10 degrees
  • Perform a run-up process of an airplane
  • Notify the towers about your readiness for take-off
  • Start the process of your take-off, which involves pushing fuel mixture knob at full and throttle advancement slowly

Learning how to manage the flight

Managing the flight is another important part of the whole training of how to fly an airplane. Here are some tips on how to better manage the flight:

  • Line up the airplane to an attitude indicator/artificial horizon
  • Turn the plane, if you see the wheel in front
  • Take a proper control over the speed. Learn on how to manage the airplane speed. Remember that the Speedometer denotes the speed of an airplane, while the aircraft tachometers denotes the speed of the engine
  • Fly with the light touch on the control devices available in the airplane
  • Once you set the desired cruising speed, you need to lock them

Learning on how to land the airplane

Landing an airplane is the final hindrance to your successful flying an airplane.

  • You need to get a clearance for landing the airplane through the clearance department on the radio communication.
  • While, landing, you need to reduce the airspeed and also have to get it right in terms of airspeed and the descending angle.
  • You need to look at the highway and also have to pay attention to the numbers as displayed on the measurement devices like Aircraft Tachometer etc.
  • Finally, reduce the throttle to an idle position and here’s your plane stops!

Flying an airplane is an awesome experience, which imbibes a thrilling touch to your heart!