9 Considerations For Critical Leak Areas In Roof

It is always indispensable to ensure the roof guarded at key areas to prevent coverage issues and not all roofing manufacturer warranties are the same. For homeowners as well as the roof, it is imperative that professional Roofers make sure a home is well protected from leaks to get the most of a warranty. Using the right material can certainly make a huge difference. To make sure warranty coverage for a homeowner, here are the top nine things that a licensed roofing contractor should do.

Install systems that have transferrable warranties. This feature adds value to your property during the time of putting it in the market for sale.

Install pre-manufactured flashing at every pipe penetration to help circumvent the entry of water.

Take advantage of problem-prevention assessments by factory-certified roofing inspectors, when available, who are technical experts and provide feedback on the installation.

Inspect the conditions of skylight. To better match the new roof’s age, old skylights should be replaced with the ones having better energy rating.

Install hip and ridge cap shingles to assist shield those areas as they get more wind pressure than other parts of the roof. The finished look of hip and ridge cap shingles can even help amplify curb appeal.

Install waterproof leak barriers at key leak areas like side walls, eaves, dormers, chimneys, penetrations, and valleys.

Install adequate attic ventilation to help manage the temperature in the attic and avoid moisture from being trapped in the attic space. Shingle roofs last longer when attics are ventilated adequately.

Install roof deck protection called underlayment, to make certain shingles will lie flat and to safeguard against wind-driven that can blow under the shingles.

Use edge metal at eaves and rakes to help shield from water infiltration at the roof’s edges.

Finally, a bonus, licensed Austin Roofers will install a single roofing system as while installing components manufactured by different brands, mismatches in warranty can occur. The entire system with shingles, attic ventilation, starter strips, roof deck protection, hip and ridge cap shingles, and leak barriers from the same manufacturer will let all these components to be covered by a single warranty and facilitate to avert finger-pointing in the event of a problem.