Do You Know What Is Inside The Lotion Pump You Are Using?

Plastic lotion pumps, the most renowned dispensing procedure for thicky products in the beauty and personal care industry, avail in all shapes & sizes. When used as per the instructions, these pumps dispense the correct volume of product time after time. But have you ever speculated what goes in a twist lotion pump to makes it works? While there are hundreds of different designs in the market today, the basic principle is the same. Here is a brief overview:

Generally talking, a lotion pump includes the below listed components:

Actuator:

An actuator, or the pump head, is what the consumer presses down to pump the product out of the container. The actuator is often made of PP plastic and can have many different designs - and often come with a up-lock or down-lock features to prevent accidental output,. This is one of the component designs that can set one pump apart from another when it comes to the exterior design, it is also the part where ergonomics play a role in consumer satisfaction.

Closure : The component that screws the entire assembly onto the neck finish of the bottle. It is identified with the common neck finish destination such as 28-410, 33-400. Often made of PP plastic, it is often designed with a rib side or smooth side surface. In certain cases a shiny metal overshell can be installed to give the lotion pump a high-end, elegant look.

Housing : Sometimes referred to the pump assembly housing, this component holds all the pump components in place as well as acting as a transfer chamber that sends the product from the dip tube to the actuator, and ultimately to the user's hand. This component is often made of PP plastic. Depending on the lotion pump output and design, the size of this housing can differ greatly. A word of caution, if you are pairing the pump with a glass bottle, as glass bottles have thicker side walls, the bottle opening may not be wide enough to fit the housing - be sure to check first for fit and function.

Dip Tube : a long plastic tube made of PP plastic that extends the reach of the lotion pump to the bottom of the bottle. Depending on the bottle the pump is paired with, the dip tube length will differ. A properly cut dip tube will maximize product usage and prevent clogging.

Today you can easily find a variety of lotion pumps including Screw lotion pump and Long nozzle liquid pump. These are quite useful products that you must have in your home.

About Author:

Yuyao Sky Commodity co.,ltd. is a modern enterprise, in the cosmetics industry, based on the research, development, sales of cosmetics packaging products.It also provides All Plastic trigger sprayer,Airless bottle,Screw lotion pump,trigger sprayer for household and garden,long nozzle liquid pump,twist lotion pump.To know more information about all products visit at www.skycospack.com