Cobra® Series Waterjet Cutting Systems from Semyx, LLC

The COBRA waterjet cutting system offers (precise) cutting of extra large sheets up to 16 feet wide which allows for mass production and cutting of large materials. The COBRA waterjet cutting series allows you to add additional cutting heads to enable double production on the same machine and higher running speeds. Like all Semyx models, the COBRA Series features a central controller for all modules and CAM software enhancements.

Special Linear Drive Belt in All Axes:

ATL timing belt is designed for the highest accuracy

Predictably negative belt length tolerance to allow near

perfect length tolerance after proper pre-tensioning

Larger tension members for the highest tensile strength and spring rate for better repeatability and reduced settling time

Used with standard AT-Series pulleys (zero backlash pulleys available for highest accuracy)

Cutting with Pure Water:

With pure water cutting, it is especially easy to cut soft materials with this procedure, including paper products, sealing materials, plastics, foams, textiles, carpets, turf, and food. Pure water cutting is extremely precise: the water jet can be finer than 0.2 millimeter and it allows the cutting of fine contours, sharp angles, and tight radii.

Higher Speed and Acceleration:

The COBRA waterjet cutting series has a high cutting speed 0-60m/min with high acceleration to increase production.

The COBRA waterjet cutting system offers (precise) cutting of extra large sheets up to 16 feet wide which allows for mass production and cutting of large materials.

The COBRA waterjet cutting series allows you to add additional cutting heads to enable double production on the same machine and higher running speeds. Like all Semyx models, the COBRA Series features a central controller for all modules and CAM software enhancements.

Semyx waterjet cutting systems have the capabilities to cut a wide range of materials, despite the shape or size.

Semyx waterjet cutting systems are used in many industries such as automotive industry, aerospace industry, military/defense industry and even the food industry. These industries use Semyx waterjets for cutting a variety of materials like steel cutting, metal cutting, glass cutting, food cutting and it can also be used for stone and tile cutting.

Contact Us :

Address : 1010 Abutment Road Dalton, GA 30721

Freephone :+ 1 877 78 SEMYX

Telephone : +1 706 529 0123

FAX : +1 706 529 0124

E-mail : Info@Semyx.Com

Visit website : http://semyx.com/cobra.html