HP Printer Setup Windows

Author: Mark Chavez
How to DJ 2130 Window Printer setup?

DJ 2130 Window Printer setup and installing a printer is an easy job. To explain in simple steps, a user has to remove all package materials, connect the power cord, install the ink cartridges in its place and then load the required paper in the main input tray. If you are looking to download the latest version of the printer software, go to http"//123hp.com/DJ2130

Step 1: Unpack the printer from the box
  • Take out the printer from the box, slowly remove all the tape, packaging materials and stickers from the printer. The contents in the printer may vary depending on the country or region. The list of items packed will be available on the printer package.
  • Remove the HP printer from the box.
  • Gently, peel out the tape and package materials from the outside of your HP printer.
  • Reach inside the printer by lowering the output tray. Now, grasp the handle and lower ink cartridge’s access door to open it.
  • Once you have reached inside, remove the tape and package materials on the inside of the printer.
  • Close the ink cartridge’s access door.
  • Check the cardboard box yet again to ensure that you have removed all the hardware materials from the box before disposing it.
Step 2: Connect the power cord and switch on the printer

Connect the printer to the computer via a power cord to switch on the HP Deskjet 2130 printer.

NOTE: Do not connect the USB cable at this point of time. The type of connection to the computer is set during the driver and software installation process.

  • Connect one end of the power cord to the socket at the back of the printer and then connect the other end of the power cord to an electrical socket.
  • Press the Power button to switch on the computer.
Step 3: Install the ink cartridges

Install the ink cartridges that were shipped in the box with your HP printer.

  • Hold the handle and lower ink cartridge’s access door to open it. Now, the carriage moves to the centre of the printer.
  • Wait patiently till your printer is silent and idle. Once it has stopped moving, continue the next step.
  • Unpack the ink cartridges from its package. Make sure that you touch the black plastic on the ink cartridges and not in any other place.
  • Remove the plastic tape on the ink cartridge.
  • Gently hold the ink cartridge by its sides. Now, slowly insert the ink cartridges by holding the nozzle towards the printer. Insert the black ink cartridge and the tri-colour ink cartridge to the right and let slot respectively.
  • Slide the new ink cartridge into the empty slot by holding it at a slight upward angle into the slot. Now, gently push the ink cartridge until it locks into its place.
  • Repeat the steps to install the other ink cartridge properly.
  • Close the ink cartridge’s access door. For more information go to http://123hp-dj2130.com/hp-printer-setup-windows