156-915.71 Exam Practice Software
Question: 1
Which SmartEvent, what is the Correlation Unit's function?
A. Invoke and define automatic reactions and add events to the database
B. Assign seventy levels to events
C. Display received threats and tune the Events Policy
D. Analyze log entries, looking for Event Policy patterns
Answer: D
Question: 2
How do you verify the Check Pant kernel running on a firewall?
A. fw ctrl get kernel
B. fw ctrl pstat
C. fw kernel
D. fw ver -k
Answer: D
Question: 3
After repairing a Smart Workflow session:
A. The session moves to status Repaired and a new session can be started
B. The session moves to status Awaiting Repair and must be resubmitted
C. The session is continued with status Not approved and a new session must be started
D. The session is discarded and a new session is automatically started
Answer: B
Question: 4
Totally Cool Secuirty Company has a large security staff. Bob configured a new IPS Chicago_Profile for fw-Chicago using Detect mode. After reviewing Matt noticed that fw-Chicago is not detecting any of the IPS protections that Bob had previously setup. Analyze the output below and determine how Matt corrects the problem.
A. Matt should assign the fw-Chicago Security Gateway to the Chicago_Profile.
B. Matt should the Chicago_Profile to use Protect mode because Detect mode
C. Matt should re-create the Chicago_Profile and select Active protections manually instead of per the IPS Policy.
D. Matt should activate the Chicago_Profile as it is currently not activated.
Answer: A
Question: 5
Which Remote Desktop protocols are supported natively in SSL VPN?
A. Microsoft RDP only
B. AT&T VNC and Microsoft RDP
C. Citrix ICA and Microsoft RDP
D. AT&T VNC, Citrix ICA and Microsoft RDP
Answer: D
Question: 6
To force clients to use integrity Security Workspace when accessing sensitive applications, the Administrator can configure Connectra:
A. Via protection levels
B. To implement integrity Clientless Security
C. To force the user to re-authenticate at login
D. Without a special setting. Secure Workspace is automatically configured.
Answer: A
Question: 7
The default port for browser access to the Management Portal is
A. 4433
B. 4343
C. 8080
D. 443
Answer: A
Question: 8
In which case is a Sticky Decision Function relevant?
A. Load Sharing - Unicast
B. Load Balancing - Forward
C. High Availability
D. Load Sharing - Multicast
Answer: D
Question: 9
You just upgraded to R71 and are using the IPS Software Blade You want to enable all critical protections while keeping the rate of false positively very low. How can you achieve this?
A. The new IPS system is based on policies, but it has no ability to calculate or change the confidence level, so it always has a high rate of false positives.
B. This can’t be achieved; activating any IPS system always causes a high rate of false positives.
C. The new IPS system is based on policies and gives you the ability to activate all checks with critical severity and a high confidence level.
D. As in SmartDefense, this can be achieved by activating all the critical checks manually.
Answer: C
Question: 10
Refer to the network topology below. You have IPS Software Blades active on the Security Gateways sglondon, sgla, and sgny, but still experience attacks on the Web server in the New York DMZ. How is this possible?
A. AH of these options are possible.
B. The attacker may have used a bunch of evasion techniques like using escape sequence instead of cleartext commands. It is also possible that there are entry points not shown in the network layout, like rogue access points.
C. Since other Gateways do not have IPS activated, attacks may originate from their network without anyone noticing.
D. An IPS may combine different detection technologies, but is dependent on regular signature updates and well-turned anomaly algorithms. Even if this is accomplished, no technology can offer 100 % protection.
Answer: C
Question: 11
Which of the following is NOT an Smartevent event-triggered Automatic Reaction?
A. Mail
B. Block Access
C. External Script
D. SNMP Trap
Answer: B
Question: 12
Your company has the requirement that SmartEvent reports should show a detailed and accurate view of network activity but also performance should be guaranteed. Which actions should be taken to achieve that?
Use same hard drive for database directory, log files and temporary directory
Use Consolidation Rules
Limit logging to blocked traffic only
Using Multiple Database Tables
A. (i), (ii) and (iv)
B. (i), (iii), (iv)
C. (ii) and (iv)
D. (i) and (ii)
Answer: C
Question: 13
What SmartConsole application allows you to change the Log Consolidation Policy?
A. SmartReporter
B. SmartUpdate
C. SmartEvent Server
D. Smart Dashboard
Answer: A
Question: 14
In configure a client to property log in to the user portal using a certificate, the Administrator MUST:
A. Create an internal user in the admin portal.
B. Install an R71 internal Certificate Authority certificate.
C. Create a client certificate from Smart Dashboard
D. Store the client certificate on the SSL VPN Gateway
Answer: C
Question: 15
What process manages the dynamic routing protocols (ospp, RIP, etc) on SecurelPlatform Pro?
A. gated
B. arouted
C. routerd
D. There’s no separate process, but the Linux default router can take care of that.
Answer: A
Question: 16
To change the default port of the Management Portal,
A. Edit the masters.conf file on the Portal server.
B. Modify the file cp_httpd_admin.conf.
C. Run sysconfig and change the management interface
D. Re-initialize SIC.
Answer: C
Question: 17
Where do Gateways managed by SmartProvisioning fetch their assigned profiles?
A. The Smartview Monitor
B. The standalone SmartProvisioning server
C. The Security Management server or CMA
D. They are fetched locally from the individual device
Answer: C
Question: 18
When synchronizing clusters, which of the following statements is NOT true?
A. Client Auth or Session Auth connections through a cluster member will be lost if the cluster member fails.
B. The stare of connection using resources is maintained by a Security Server, so there connections cannot be synchronized.
C. Only cluster members running on me same OS platform can be synchronized.
D. In the case of a failover, accounting information on the failed member may be lost despite a properly working synchronization.
Answer: D
Question: 19
What command will allow you to disable sync on a cluster firewall member?
A. fw ctl setaync 0
B. fw ctl syncsatat stop
C. fw ctl syncstat off
D. fw ctl setsync off
Answer: D
Question: 20
By default, a standby Security Management Server is automatically synchronized by an active Security Management Server, when:
A. The Security Policy is saved.
B. The Security Policy is installed.
C. The user database is installed.
D. The standby Security Management Server starts for the first time.
Answer: A
Question: 21
A customer is calling saying one member's status is Down. What will you check?
A. cphaprob list (verify what critical device is down)
B. Fw ctl debug –m cluster + forward (forwarding layer debug)
C. tcpdump/snoop (CCP traffic)
D. fw ctl pstat (check sync)
Answer: A
Question: 22
You have a High Availability ClusterXL configuration. Machines are not synchronizer. What happens to connections on failover?
A. It is not possible to configure High Availability that is not synchronized.
B. Old connections are lost but can be reestablished.
C. Connection cannot be established until cluster members are fully synchronized.
D. Old connections are lost but are automatically recovered whenever the failed machine recovers.
Answer: B
Question: 23
When using ClusterXl in load sharing, what method is used be default?
A. IPs, SPIs
B. IPs, Ports, SPIs
C. IPs
D. IPs, Ports
Answer: C
Question: 24
John is configuring a new R17 Gateway cluster but he cannot configure the cluster as Third Party IP Clustering in Gateway Cluster Properties:
A. John is not using third party hardware as IP Clustering is part of Check Point’s IP Appliance.
B. Third Party Clustering is not available for R71 Security Gateways.
C. ClusterXL needs to be unsetected to permit 3nd party clustering configuration.
D. John has an invalid ClusterXL license
Answer: C
Question: 25
A customer calls saying that a load-sharing cluster shows drops with the error First packet is not SYN. Complete the following sentence. I will recommend:
A. Change the load on each member.
B. configuring flush and ack
C. turning off SDF (Sticky Decision Function)
D. turning on SDF (Sticky Decision Function)
Answer: D
Test Information:
Total Questions: 313
Test Number: 156-915.71
Vendor Name: Check Point
Cert Name: CCSE
Test Name: Check Point Certified Security Expert R71 Update
Official Site: https://www.certswarrior.com/
For More Details: https://www.certswarrior.com/exam/156-915.71/