How to Take Care of Ariel Compressor Parts?
Author: Tim Kelley
Ariel is one of the leading names when it comes to compressors. Its products are used globally and are known for their reliability and robust build. However, there may come a time when you will need to replace Ariel compressor parts as part of routine maintenance and servicing to prolong the lifespan of the product. To prevent frequent replacements and to save money, consider taking care of Ariel compressor parts using the following tips:
- Change the oil – An oil change will be one of the most critical steps to prolonging the lifespan of the compressor and its parts. Just be sure to drain the oil properly. Start by switching on for a few minutes to warm up the machine and allow the oil to drain well for later. Remove the fill cap and let air into the system, and remove the drain plug to allow the oil to drain into a container. Replace the drain plug with an adjustable wrench and fill the compressor with high-quality oil, preferably one that is recommended by Ariel.
- Drain the moisture – The receiver tank is among the crucial Ariel compressor parts that collects moisture from air, especially under humid conditions. Air compressors typically have a valve that can let you drain the moisture, so be sure to do that regularly. Just remember to release air pressure from the tank before draining the moisture.
- Clean the intake vents – Failure to keep the air intake vents in good condition will cause your air compressor to work harder, which can speed up its deterioration and result in a low-quality performance. So, take time to inspect it for dirt and debris, and clean the vent as often as you can if you are using the machine in a dirty or dusty area.
- Check the filter – Air filters are essential Ariel compressor parts, and they may need to be replaced or cleaned to make sure that the machine can work efficiently. You should be able to remove a filter by pinching it with a finger or unscrewing it from the compressor.
- Tighten the air fasteners – Nuts, bolts, and screws could loosen over time, as the air compressor vibrates while running. So, check those Ariel compressor parts periodically and tighten them if they have become a bit loose.