Features of CertsWarrior Cisco 400-101 Exam Dumps 2018
Question: 1
trace 1 interface Serial 1/0/1 ip routing
trace 2...
trace 3...
int g0.0
...
glbp 29 weighting track 1
glbp 29 weighting track 2 decrement 30
glbp 29 weighting track 3 decrement 5
...
Refer to the exhibit. after you configured R1 as an AVF in GLBP group 29 as shown, IP routing was lost on
interface Serial 1/0/1, Serial 1/0/2 and GigabiEthernet0/2, causing R1 to lose its AVF minimum action you must
take so that R1 can regainits AVF status?
A. Restore IP routing on Serial 1/0/2 only
B. Restore IP routing on both GigabitEthernet 0/2 and Serial 1/0/2
C. Restore IP routing on Serial 1/0/1 only
D. Restore IP routing on GigabitEthernet 0/2 only
E. Restore IP routing on both GigabitEthernet 0/2 and Serial 1/0/1
F. Restore IP routing on both Serial 1/0/1 and Serial 1/0/2
Answer: C
Question: 2
username cisco1 password cisco 1
username cisco2...
username cisco3...
username cisco4 privilege 15 password cisco4
aaa new-model
aaa authentication login default group tacacs+ local
aaa authorization exec default group tacacs+ local
ip http server
ip http authentication aaa
...
Refer to the exhibit. if the TACACS+ server is unreachable, which user will be able to use HTTP to configure the router?
A. cisco1
B. cisco2
C. cisco3
D. cisco4
Answer: D
Question: 3
how does control plane policing protect the route processor?
A. It treats the route processor as a separate entity within MQC
B. It disables access to the control plane during an attack
C. It dynamically enables ingress ACLs on selected interfaces
D. It marks non-essential traffic and moves it to the Scavenger class
Answer: C
Question: 4
On a network with multiple VLANs, which three tasks must you perform to configure IP source guard on
VLAN 50 only?(choose three)
A. Configure the ip dhcp snooping vlan 50 command on the interface
B. Configure the ip dhcp snooping vlan 50 command globally
C. Configure the ip dhcp snooping command on the interface
D. Configure the ip verify source command globally
E. Configure the ip dhcp snooping command global
F. Configure the ip verify source command on the interface
Answer: BEF
Question: 5
Which command sequence must you enter to configure SSH access to a Cisco router?
A. A.ip ssh version ip domain-name crypto key zeroize
B. B.hostname ip domain-lookup crypto key generate rsa
C. C.hostname ip domain-name crypto key zeroize
D. D.ip ssh version ip domain-name crypto key generate rsa
E. E.ip shs version ip domain-lookup crypto key zeroize
F. F.hostname ip domain-name crypto key generate rsa
Answer: F
Question:6
Which two statements about the output are true?(Choose two)
A. BFD last failed 476ms ago on interface GigabitEthernet 0/3.
B. BGP on RT1 has negotiated the BFD capability with its peer.
C. BFD is active on interface GigabitEthernet0/3 and is using ICMP.
D. BFD is active on interface GigabitEthernet0/3 and is using UDP.
E. BFD is active for BGP on RT1
Answer: BE
Question: 7
Which feature can you implement to most efficiently protect customer traffic in a rate-limited WAN Ethernet service?
A. IntServ with RSVP
B. DiffServ
C. Q-in-Q
D. The IPsec VTI qos pre-classify command
E. HCBWFQ
Answer: B
Question: 8
Which statement is true about conditional advertisements?
A. Conditional advertisements create routes when a predefined condition is met.
B. Conditional advertisements create routes when a predefined condition is not met.
C. Conditional advertisements delete routes when a predefined condition is met.
D. Conditional advertisements create routes and withhold them until a predefined condition is met.
E. Conditional advertisements do not create routes, they only withhold them until a predefined
condition is met.
Answer: E
Question: 9
Which option describes how a router responds if LSA throttling is configured and it receives the identical LSA before the interval is set?
A. The LSA is added to the OSPF database and a notification is sent to the sending router to slowdown its LSA packet updates.
B. The LSA is added to the OSPF database.
C. The LSA is ignored.
D. The LSA is ignored and a notification is sent to the sending router to slow down its LSA packet Updates.
Answer: C
Question: 10
Which data plane protocol does EIGRP Over the Top use?
A. GRE
B. MPLS
C. LISP
D. IP-in-IP
Answer: C
Question: 11
Which traffic gets set to AF41 by the marking policy on interface
GigabitEthernet0/0?
A. Only traffic matching access-list streaming
B. No traffic gets set to AF41
C. Any traffic matching access-list tp-rooms and access-list streaming
D. Only traffic matching access-list tp-rooms
Answer: C
Question: 12
What are two effects of the given configuration??Choose two?
A. Track objiect 100 goes down if Ethernet1/0 goes down.
B. The aggregate weight of track object 100 is set to 30.
C. Track object 100 goes down if Ethernet1/2 goes down.
D. The aggregate weight of track object 100 is set to 40.
E. Track object 100 stays up as long as both Ethernet1/0 and Ethernet1/1 are up.
F. Track object 100 goes down if all three interfaces go down.
Answer: EF
Question: 13
Which PIM mode can forward traffic by using only (*.G) routing table entries?
A. Space-dese mode
B. Bidirectional mode
C. Deuce mode
D. Sparse mode
Answer: B
Question: 14
Which TCP feature allows a client to request a specific packet that was lost?
A. Selective acknowledge
B. Flow control
C. Fast recovery
D. Sliding window
Answer: A
Question: 15
You are configuring Router 1 and Routef2 for L2TPv3 tunneling. Which two additional configurations are required to enable Router 1 and Routei'2 to establish the tuimel? (choose two)
A. Router 1 must be configured to encapsulate traffic by using L2TPv3 under the pseudowire-class RltoR2.
B. An IP address must be confiaured on interface FastEthernet1/0 onRouter1.
C. Loopback 0 on Router1 must be advertised to Router2.
D. Cisco Express Fowarding must be disabled on Router1.
E. Cisco Discovery Protocol must be enabled on interface FastEthernet1/0 onRouter1.
Answer: AC
Question: 16
Which TCP feature allows a client to request a specific packet that was lost?
A. Flow control
B. Sliding window
C. Fast recovery
D. Selective acknowedgment
Answer: D
Question: 17
You are configuring Router1 and Router2 for L2TPv3 tunneling. Which two additional configurations are required to enable Router1 and Router2 to establish the tunnel?(choose two)
A. Router1 must be configured to encapsulate traffic by using L2TPv3 under thepseudowire-class R1toR2.
B. An IP address must be configured on interface FastEthernet1/0 on Router1.
C. Loopback 0 on Router1 must be advertised to Router2.
D. Cisco Express Fowarding must be disabled on Router1.
E. Cisco Discovery Protocol must be enabled on interface FastEthernet1/0 on Router1.
Answer: AC
Question: 18
Which option is the origin code when a route is redistributed into BGP?
A. IGP
B. EGP
C. External
D. Incomplete
E. Unknown
Answer: D
Question: 19
When you deploy DMVPN,what is the purpose of the command crypto isakmp key ciscotest
address 0.0.0.0 0.0.0.0?
A. It is configured on the hub and spoke routers to establish peering.
B. It is configured on the hub to sent the pre-shared key for the spoke routers
C. It is configured on the Internet PE routers to allow traffic to traverse the ISP core
D. It is configured on the spokes to indicate the hub router.
Answer: B
Question: 20
What conclusion can you draw from the given ping output?
A. The ping operation sent packets ranging from 505 to 1500 bytes in size.
B. Fragmentation failed during the ping operation.
C. The packet life was exceeded in 5 percent of the operations.
D. The Verbose option was set in the IP header.
Answer: B
Question: 21
Which statement is true about trunking?
A. DTP only supports autonegotiation on 802.1q and does not support autonegotiation for ISL
B. Cisco switches that run PVST+ do not transmit BPDUS on nonnative VLANs when using a
C. dot1q trunk.
D. DTP os a point-to-point protocol.
E. When removing VLAN 1 from a trunk,management traffic such as CDP is no longer passed
in that VLAN.
Answer: C
Question: 22
Which command can you enter on an interface so that the interface will notify the sender of a packet that the packet that the path is sub-optimal?
A. ip nhrp record
B. ip nhrp set-unique-bit
C. ip nhrp shortcut
D. ip nhrp redirect
E. ip nhrp cost 65535
Answer: D
Question: 23
Which technology can be used to prevent flooding of ipv6 multicast traffic on a switch?
A. MLD filtering
B. IGMP snooping
C. MLD snooping
D. IGMP filtering
Answer: C
Test Information:
Total Questions: 737
Test Number: 400-101
Vendor Name: Cisco
Cert Name: CCIE
Test Name: CCIE Routing and Switching Written Exam v5.1
Official Site: https://www.certswarrior.com
For More Details: https://www.certswarrior.com/exam/400-101/