8 Great Ways How To Purify Water For Drinking

Read this article to learn about some of the best ways for the purification of drinking water and the ways in which Water Treatment Chemicals Suppliers ensure its safety.

Water purification has become a necessity in today’s time due to excessive pollution that prevails these days. Here are some of the ways in which you can purify water using Water Treatment Chemicals so that it becomes suitable for drinking:

1. Boiling Water

Boiling is a simple procedure followed by Water Treatment Chemicals Suppliers in India and you too can use the same to cleanse water which is unsafe for drinking as the micro-organisms such as bacteria, parasites, and viruses, tend to contaminate the water over time. With this, the micro-organisms tend to get eliminated by pushing the virus and bacteria past the heat range. During this procedure, you do not need to add chemicals to the water. However, the disadvantage to this procedure is that boiling does not remove harmful chemicals or metals. So, you should be cautious about the contaminants such as pesticides, solvents, nitrates, and make sure that the water is free from such impurities.

2. Water Chlorination

Using the household chlorine bleach can help in the purification of water. All you need to do is to use 5 to 6 percent of chlorine which would act as a heavy duty oxidant and would kill harmful microorganisms on the go. However, you would need to take care of the fact that the household bleach comes with an expiration date and should only be chosen if they do not have any dyes, additives, or perfumes.

3. Ozonation

In this method, ozone is used as a disinfectant and is added to the water by contacting bubble so as to break down microbiological problems along with the taste and odor. You would make such a system available at a high operational cost, but the fire hazards along with the toxicity concerns are related ozone generation.

4. Iodine Treatment

You can use this treatment for the purification of untreated sources. The iodine would kill the pathogens that might exist in the natural freshwater sources but not entirely. It is also available in the form of tablets which can be used for cleaning the water.

5. Ultraviolet Germicidal Treatment

In this method, ultraviolet radiation of short wavelength is used to kill the contaminants in water. This is one of the most cost-effective ways and is not labor intensive.

6. Solar Disinfection

Solar energy has the power to kill the microbes in water, and this method is probably one of the most renewable ways in which you can treat the water.

7. Solar Distillation

A makeshift still is constructed to treat the portable water purifier and can then be borrowed in the ground for future use.

8. Reverse Osmosis

You can use this method to remove inorganic solids from the water, and this is done by applying osmotic pressure.

Amoda Chem & Services LLP is one of the pioneering entities when it comes to the chemical supply in the laboratory. We supply chemicals in different industries right from agriculture to healthcare and others.