Fix HP LaserJet Pro CP1025 and CP1025nw Fuser Error

Author: Paul Anderson

The customers get a ‘Fuser error’ status notification on their HP LaserJet Pro CP1025NW printer. And such an error indicates that the printer stops working and printing out any document. To get HP printer back in the work station, the user needs to purchase a new Fuser or else Reset the Machine which means do power off/on. Stay connected with the team of HP Support Assistant if unable to eradicate this issue by the own. The team is highly qualified and having immense years of experience in dealing with the query related to HP printer or any other printer device. They have proficiency to cope-up all the printer hurdles within a least time interval.

The HP LaserJet Pro CP1025nw is the smallest color laser printer and also one of the most energy efficient. One can share printing with his/her colleagues as it is equipped with built in Ethernet and wireless 802.11b/g/n networking. Such model of printers adds a high quality color using an affordable, wireless and Ethernet which is connected HP LaserJet. Most of the person facing a ‘Fuser error’ on their HP LaserJet Pro CP1025 series printer, and then they need to replace the fuser assembly. Fusers are a consumable part and it is expected over the life of the printer. A fuser can fail depending on printing conditions, heavy paper jams, and the quality of the fuser installed. So, keep these things in mind while printing.

Methods to Exterminate HP LaserJet Pro CP1025 and CP1025nw Fuser Error

There is not only one procedure to overcome this issue as there are different ways to annihilate Fuser error. All those methods are mentioned below, so keep your eyes feast here:

1. Reset The Printer

Resetting the printer is the best way to terminate not only fuser error but also many other issues related to printer. So, reset the printer with the help of following steps:

  • Turn-off the printer first by pressing the Power button
  • Now, disconnect the power cord
  • Wait for a second, and then connect the power cord again
  • After that again press the ‘Power’ button to turn on the printer
  • Wait for a while to start
  • Try printing again

If these steps eliminated the issue, you do not need to continue troubleshooting. But in case the issue persists yet, continue to the next solution.

2. Reset The Printer And Then Wait For 25 minutes

Follow the below points to do so:

  • Turn-off the printer by pressing the Power button
  • Disconnect the power cord
  • Wait for 25 minutes, and then reconnect the power cord
  • Now, again turn-on the printer by pressing the Power button. Wait for a minute to start
  • Try printing now

If the above procedure is helpful for you, then do not continue with the troubleshooting process. But if the same error still persists, then jump to the next procedure.

3. Plug The Printer Directly Into A Walk Socket And Then Reset The Printer

Go through the below points:

  • Turn-off your printer first
  • Now, disconnect the power cord
  • Unplug the power cord and then plug it directly into a wall socket
  • Reconnect the power cord to the printer
  • Turn-on the printer again. Wait for the product to start

Now, try to print to check whether the fuser error has gone or still remaining. If you find the same error yet, then without wasting your single minute, put a call at HP Printer Support Number. Here, your call will be connected with the top-most technicians and they will guide you all the steps at an ease.

View Source: http://www.pearltrees.com/hpprintercare/item243886487