What are the Uses and importance of titanium grade 2 sheets, plates and coils?

Grade 2 titanium is also called as the workhorse of the CP or commercially pure titanium industry. This grade has become popular because of varied usability and wider availability. It shares many good qualities similar to other titanium grades but is slightly stronger and is also possessing excellent corrosion resistant ability. This grade is possessing excellent weldability, ductility, high tensile strength, and formability. This is making Grade 2 titanium products like titanium grade 2 sheets, plates and coils prime choice for various applications. It is used in applications all across the globe in different industries.

Uses-

Many applications are there in which Titanium Grade 2 Sheets, Plates and Coils are used. It is used in water treatment facilities, construction, power plants, pharmaceuticals, pulp and paper, kitchen and appliances, modern architecture. Also used in textile machinery, oil and gas processing, fertilizers etc.

Importance of titanium grade 2 products-

Corrosion resistance-

The corrosion resistance of titanium grade 2 is because of the presence of continuous, stable and tightly oxide layer. This layer forms spontaneously and faster on exposure to oxygen and even if it gets damaged, it reforms as long as some source of oxygen is there in the environment. In saline water, it is corrosion resistant at the temperature ranging up to 600 Deg F. The crevice corrosion possibility needs to be necessarily considered.

Fallibility-

The condition under which commercially pure titanium Grade 2 is corrosion susceptible is molten chloride salts, alkaline peroxide solutions, and strong reducing acids. Crevice corrosion occurs in the sulfate solutions that can be the considerations at the marine applications. The conditions in which titanium grade 2 seems to be vulnerable to SSC is including anhydrous methanol solutions, nitrous oxide, liquid mercury, nitrous oxide, and red fuming acid. The risk of hydrogen embrittlement from the formation of hydrides is there. The specifications for the gr-2 mill industrial goods typically specifies maximum hydrogen limit of about 150ppm but is possible for degradation to occur at low level particularly at the availability of notch.

Heat treatment-

The standards heat treatment is used for CP titanium is stress relieving and annealing. Annealing is employed for softening the material and removes all the residual stress. The precise control of grain size can be achieved easily by adjusting the annealing temperature. Stress relieving is used for removing the residual stresses from forming or for receiving the compressive yielding strength after stretching.

Machinability-

The machining of grade 2 is similar to austenitic stainless steel. In general low cutting speed, a copious amount of cutting fluid and heavy feed rates is suggested. The sharp tool and rigid setups are also essential. Due to the strong tendency of titanium Gail and smear, feeding shouldn’t be stopped when the workpiece and tool are moving.

Weldability-

Titanium gr-2 can be welded with filler metals. An inert gas shielding technique needs to be employed for the prevention of embrittlement at the weld area and at oxygen pickup. Gas tungsten arc welding is the common welding process for commercially pure titanium. Plasma arc welding spot welding, laser beam, resistance welding, and diffusion welding is all used in welding applications.

If you are seeking to buy it, get from a reliable supplier specialized in making and supplying a qualitative range of Ti Gr-2 sheet, plate, and coil.