What are the Components of a Servo Voltage Stabilizer?
As the name suggests, a voltage stabilizer produces a stabilized voltage to the electronic devices with the variable or fluctuating supply voltage. It is not only a voltage fixing system, but it is also considered as a completely reliable energy device. In addition to this, the servo voltage stabilizer captures the fluctuating voltage at the input and provides a constant voltage and current and the output of stabilizer and input of electronic devices. Therefore, you can go through the Servo Voltage Stabilizer Manufacturer in Bangalore where you can purchase the suitable stabilizer for your requirement.
Furthermore, there is a servomotor which is used for synchronizing motors is considered as the main part of the servo voltage stabilizer. In addition to this, an AC synchronous motor is used for adjusting voltage in a clockwise direction or an anticlockwise direction. Thus, the servo stabilizer produces an output voltage with the various components such as dimmer, transistors, mocs, control card, comparator, etc.
However, there are two types of stabilizers which include: Single Phase Voltage Stabilizer for Home and residential purpose and Three Phase Servo Voltage Stabilizer. Furthermore, you can go through the sever main components of a servo stabilizer through which you can gain in detailed knowledge of the same. Therefore, the components include servomotor used for synchronizing motors, dimmer, buck-boost transformer, MCB and MCCB, Carbon Brush, Electronic circuit, contractor or relay.
Servomotor (Synchronizing Motors): -
This motor is the main part of the servo voltage stabilizer which rotates the arm connected to the dimmer based on the input voltage in a clockwise direction or anti-clockwise direction.
Dimmer: - It is a variable transformer which is round in the shape. Furthermore, based on the capacity of the servo voltage transformer, the base and copper wire are rounded with a specific turn ratio. However, the main working of the dimmer is to increase or decrease the voltage which is to be produced at the output.
Buck Boost Transformer: -
It is a series transformer which is rectangular in shape in which the bobbin is fitted with EI CRGO core and dipped in varnish tank for extra protection. However, you can use the Single Phase Voltage Stabilizer for Home and residential based electronic equipment. In addition to this, you can also purchase Three Phase Servo Voltage Stabilizer from the stabilizer manufacturing companies and choose the one with suitable capacity based on your requirement.
Carbon Brush: -
It is a moving part which is fitted in the shaft to get in contact with the dimmer – a variable transformer. However, if the input voltage varies frequently, the Servo Voltage Stabilizer Manufacturer in Bangalore are suggested to use the best carbon brush in the manufacturing process.
Contractor: -
Contractor cuts the output voltage of any servo voltage stabilizer if it exceeds or goes higher than the prescribed limit.
MCB and MCCB: -
MCB is used for the protection of short circuit and MCCB is used for overload protection. Therefore, based on your industrial or domestic requirement, you can make a purchase from the best Servo Voltage Stabilizer Manufacturer in Bangalore.
Electronic Circuit: -
An electronic circuit connects all the components of the servo voltage stabilizer so that the signal passes in the correct way for effective working of the stabilizer.
CONTACT US:
Phone:080-2836-2255
Email: sales@saveawatt.in
Webadress: http://www.saveawatt.in/