What are the differences exist between step up and step down transformer?

The transformer manufacturers in Hyderabad manufacture different types of transformers used in electrical environments to supply the electrical energy between two or more circuits through electromagnetic induction. Then this induction generates a force across the conductor of the transformer which is exposed to numerous magnetic fields. Normally, these transformers manufactured by the electrical transformers manufacturers in Hyderabad either increase or decrease an alternating current (AC) & voltage in a power application.

Here step-up transformer comes in to picture to enhance an AC current or voltage and step down transformer to reduce the AC current or voltage. The step-up transformer manufacturers build the step-up transformer in such a way that the primary voltage is less than the secondary voltage. So, an application of 220v supply, a step-up transformer will be needed to use a 500v product. This type of dry-type transformer-based upon magnetic induction exists between the primary and secondary coils, which transforms the voltage or current levels.

The transformer manufacturing company place two or more insulated wires wound around an iron core. When there is supply voltage to the primary coil, then the magnetic induction magnetizes the core and induces a voltage in the secondary coil. The step up transformer manufacturers concentrates on the turn ratio of the two sets of the windings which actually decide the voltage level in the output side. With the same step-up transformer the voltage ratio will remain consistent. The Isolation Transformer manufacturer notes that a step-up transformer transforms the high current, low voltage power to low current, high voltage power. There is also the possibility that using a step-up transformer as a reverse connection.

The need for manufacturing step-up transformers by the dry type transformer manufacturer is for applications actually required in industrial plants. Their heavy and powerful machines need this kind of high voltage and don’t require a step-down transformer. Vajra Transpower is one of the leading step-up transformer manufacturers in Hyderabad and satisfies the demand of different industries. By reversing step down transformer, we can get the same result of the step-up transformer. But it is not an efficient way. It is good to invest in a manufacturing step-up transformer after knowing the actual voltage requirements. Among different kinds of transformers, a step-up transformer is that kind of transformer that boosts the voltage level from its power source from primary to the secondary coil. According to the turn ratio of the step-up transformer, there are more turns on the secondary coil as compared to the primary coil. That’s why the secondary voltage is greater than the primary voltage. Because of supplying in wide ranges in different industries, Vajra Transpower is also considered as the best distribution transformer manufacturer in Hyderabad.

The principle of the step-down transformer is the exact opposite of the step down transformer. The actual requirement of the step-down transformer is where we need to save energy. In step down transformer, with the higher voltage and lower current, less amount of energy gets wasted. In houses, offices, step down transformers is used.

Contact Us:

Website: http://www.vajratranspower.com

Email: info@vajratranspower.com

Mobile No: +91-9121685111