Why do injection moulds need to be tested
Defects in most injection molding products are caused during the plasticizing and injection phases of the injection molding parts, but are sometimes related to design irrationality, including the type of injection port, the number of mold cavities, location and size, the design of the cold and hot runner system, and the structure of the product itself. Therefore, in order to avoid product defects caused by mold design, we need to analyze the injection mold during production.
After the test results of injection mold are obtained, the operator usually needs to evaluate the specific conditions of the mold, so as not to increase unnecessary costs and time in the process of modification.low volume manufacturing service In most cases, in order to make up for its deficiency in die design, the operator may be unwittingly made incorrect Settings, because the parameters required for the production of qualified products range is very small, once there’s any deviation in parameter Settings, may lead to the final product quality far beyond the allowed error range.
free shipping coupon code: freeshipping on any order over 2000USD from jasonmolding.com
The purpose of the injection mold test is to find out the optimized process parameters and mold design. Not just to get a good sample. This is very important. Even if materials, machine Settings or environmental factors change, it can still ensure a stable and continuous mass production environment.
About JasonMould Industrial Company Limited
Rapid Prototyping Service
Jasonmould is a China mold maker of plastic molds- injection mold, die casting moulds, plastic blow molding, rotational molding, medical plastic injection molding, two shot plastic injection molding, insert molding, overmolding, metal injection molding, micro injection molding, powder injection molding, ceramic injection molding, liquid injection molding, husky injection molding, household mold, casting mold, die mold tool, custom molds, china moulds, rapid prototyping tooling, plastic prototyping tooling, punch press tooling, die and tooling for mobile/ cell phone parts, automotive parts, vacuum cleaners, rechargeable tools, telephones, copiers, computers, multimedia speakers, and many other electronic products and household appliances. And also a plastic product manufacturer, mold manufacturer China– plastic parts, plastic water tank, plastic balls, plastic containers, plastic buckle, plastic anchor, plastic hanger, plastic spoon, plastic pipe fitting, plastic tumble, plastic tableware, plastic cups, plastic bottles, plastic tray, plastic cosmetic container, plastic case, plastic food container, plastic chairs, plastic caps, plastic cap closure, plastic tubes, plastic water pipes, plastic knobs, plastic tubing, plastic utility boxes, plastic racks and so on.
Defects in most injection molding products are caused during the plasticizing and injection phases of the injection molding parts, but are sometimes related to design irrationality, including the type of injection port, the number of mold cavities, location and size, the design of the cold and hot runner system, and the structure of the product itself. Therefore, in order to avoid product defects caused by mold design, we need to analyze the injection mold during production.
After the test results of injection mold are obtained, the operator usually needs to evaluate the specific conditions of the mold, so as not to increase unnecessary costs and time in the process of modification.low volume manufacturing service In most cases, in order to make up for its deficiency in die design, the operator may be unwittingly made incorrect Settings, because the parameters required for the production of qualified products range is very small, once there’s any deviation in parameter Settings, may lead to the final product quality far beyond the allowed error range.
Contact:
Person: James Yuan
Company: JasonMould Industrial Company Limited
Add: LongGang Village,LongXi Town,BoLuo County,HuiZhou City,GuangDong Province, China
Tel: 86-752-6682869
Email: james@jasonmolding.com
Site: https://www.jasonmolding.com/custom-injection-molding/