Mechanical review of Din rail fiber optic patch panel – Unisol Communications
For fiber administration, Din rail fiber optic patch panel is an incorporated unit, Inside the box and in addition to settle these equipment functions and deal with the fiber optic cables. Fiber enclosure can mount on the standard 35mm Din rail fiber optic patch panels are DIN rail frame. These Din rail suitable for mounting DIN rail panels where there are space imperatives inside PLC’s and suitable for CCTV and surveillance applications. It tends to be utilized in modern applications effectively as it has a smaller and toughly composed case.
UNISOL Din rail fiber optic patch panels are intended to experience modern applications. There are three sections in the Din-rail fiber optic patch panel, the detachable front panel that incorporates various kinds of fiber adapters which give access to interface the optoelectronic device and another compartment that envelop fiber optic splice for assurance sleeves and space for excess fiber and pigtail routing. Din rail base is the most essential part which climbs/settles the patch panel onto the 35mm Din Rail frame.
The size of the Din rail fiber optic patch panels are compact, and that can mount in a cabinet with another Din rail hardware. The ideal decision for ending fiber data cables is a conservative arrangement of enclosures where the cost of an outdoor enclosure is not desired. For dynamic hardware, Din rail fiber optic patch panels keep the patching adjacent. In the cabinet of cable management, it serves and limits. For the transformation of outdoor and indoor related cables without the need to introduce a whole rack enclosure or panel system, these boxes are perfect. These enclosures can be utilized to give the most extreme number of fiber connections in a negligible impression.
UNISOL® Nano Din rail Patch panel is designed to support fusion splicing or direct termination of the fibers. Because of its compact and ruggedly designed case, it is suitable for industrial applications. Din rail mounted patch panel includes a splice tray for fusion splicing. Din rail enclosure is compact in size and can be mounted on a cabinet with other din rail equipment where there is space constrains inside PLCs. Din Rail mount enclosures are suitable to mount in substation automation networks and these can be used to provide a maximum number of fiber connections in a minimal footprint.
Din Rail mount fiber patch panel is used in CCTV traffic monitoring, toll systems and environmental monitoring equipment where these can be secured in small wayside cabinet backplane or side panel. The patch panel can be loaded with a variety of adapters like ST, SC, FC, and LC.
Features:
- Compact size perfect for limited space enclosures
- MS/Aluminum housing with 7 tank process powder coating
- Suitable for DIN-Rail and surface mount applications
- Replaceable panel for SC/ST/LC/FC type couplers
- Allow a maximum of 2 cables entry
- Patch or fusion splice field termination standard
- Splice holder for pigtail splicing
- Because of its compact and ruggedly designed case, it is suitable for industrial applications.
- Available with metal DIN-Rail mount for Industrial high-temperature conditions and applications
- Oil & Gas Industries
- CCTV & Surveillance Applications
- Rail Signalling & Control Applications
- Process Automation & Control Systems
- Power Systems & Controls