10 Basic steps of Water Tank Cleaning

most of us focus primarily on the purification of the water tank cleaning that we drink or use for cooking purpose. But we rarely pay attention on the cleaning of water tank cleaning where water is stored. Every day we use the water tank cleaning for brushing and bathing, for cleaning and moping, for washing clothes and in other household chores. With the passage of time, sediments, scale and algae get deposited on the walls, ceiling and floor of the water tank cleaning. This deposition contaminate the water and makes it unfit for use. With time algae and bacteria grow and breed in this water, infect it and could make us fall sick eventually. It simply means that our ignorance may take a toll on the health of our family.

Tank cleaning is very necessary and should be done at least once in a year. But it also depend on the quality of water supplied into homes. If the water is very hard and high in TDS, then sedimentation will happen more often. In such cases more than one annual water tank cleaning is required.

The basic steps involved in water tank cleaning are:

Step 1: The area surrounding the tank and top of the tank is cleaned

Step 2: Tools used in tank cleaning process are disinfected

Step 3: Water and sludge is drained out from the tank using a sludge pump

Step 4: Manual scrubbing of the tank is done to remove the dirt, sediments, fungus & stains

Step 5: Walls, ceiling and floor of the tank is washed using a high pressure jet

Step 6: Vacuum cleaning is done to ensure that all the dirt is sucked out

Step 7: Vacuumed tank is disinfected with anti-bacterial spray or liquid bleach

Step 8: Tank is filled with water that is made to run through the taps to disinfect the water pipes

Step 9: Water tank cleaning from the tank is drained through the taps and tank is left empty for drying

Step 10: Tank is clean and ready to be filled with water for domestic use

This whole process probably take around 4-6 hours but it’s worth doing for the health of your family and loved ones.

This whole process probably take around 4-6 hours but it’s worth doing for the health of your family and loved ones.

As a caution it is suggested not to perform water tank cleaning yourself or without the supervision of any professional, since it involve use of disinfectants and specialized tools.

So if it has been ages since you cleaned your water tank cleaning and also believe that the healthof your family is your first priority, book a water tank cleaning appointment with Mr Right.

The water tank cleaning is one of the most important objects of your house as it is the main source of water. You use water for various purposes, like cooking, washing, drinking etc. In order to take care of your family, you must ensure that the water tank cleaning is clean and tidy.

Overhead water tank cleaning may sound like too much of work, but it’s important. You always think of clean water, you install aquaguard and water filters at your home, you even boil water for your kids, but you must not forget about the water tank cleaning as well. Properly cleaned water tank cleaning will help you maintain health and hygiene in better ways.

In this post, I will discuss the procedures of water tank cleaning the overhead water tank in 5 easy steps. The clean water tank is the root of good health and hygiene and that’s the reason people these days go for professional water tank cleaning services to clean overhead tank and underground sump. But you please make sure you have ample water in your reservoir before cleaning the tank.