Important Do’s And Don’ts of Installing Telephone Cables for Commercial Buildings

Almost everyone is having smartphones, but that doesn’t mean the telephones are not used. In the manufacturing industries, the only source to communicate with people is through telephones. Plenty of telephone cable installers are available in the industry. There are so many things that should be considered while installing telephone cables in residential and commercial buildings. The telephone cable installers are following certain work ethics and do’s and don’ts while doing the telephone Lead-in cable installation. All these do’s and don’ts will improve the efficiency of the telephone cables. Let’s see the do’s and don’ts that should be followed in installing telephone cables.

Do’s of telephone cables

The following are the do’s that should be followed in installing the telephonic cables.

Keep the cable dry and cool

Whenever the person is involved in the telephone lead-in cable installation, they will make sure that they keep the cables away from the water. As you know, water and electrical devices should not make contact with each other, and so they will keep the cables away from the water. If the cable is in the wet condition or with any water moisture, it will affect the efficiency of the cables.

Check the cable length

In the do’s checklist for the installation of telephone cables, you have to check for the length of the cable. This is because, if the length of the cable is not measured properly, it will not cover the area. Before going to install the telephone cable, you should measure the length of the cable.

Plan for the future

The installer will make the plan and install the telephone cable by keeping the future plans in the mind. This is because, when there is any fault that has occurred, they have to remove the fault from the cable. Apart from the faults, if any new technology is introduced in the telephone cables, you have to replace the existing telephone cables to the new technology. So the best telephone installer will install the cable by keeping a plan for the future in their mind.

Don’ts of installing the telephonic cables

The following are some of the things that should not follow in the telephone Lead-in installation.

Keep the cables near other electrical cables

Even though both the electrical cables and the telephonic cables are going to carry the different signals, you should not place the cables nearer to each other. Whenever the cables are placed nearer to each other, you are able to feel the sound interference and noise disturbance. This noise interference will have an effect on the signal transmission and reception. So it is recommended to keep a minimum distance from the electrical cables and the telephone cables.

Bundle up the cables

You might have noticed that the installers are not bundled up the telephone cables tightly. Whenever the cables are bundled up, they will lose their productivity and affect the efficiency of the cables. Moreover, when the telephone cables are bundled, it is difficult to find the cable with faults. All these bundle cables will affect the quality of the signals and produce the noise in the signal. So it is recommended not to bundle the cables while installing.

Overload the cable tray

Cable tray is nothing but the safe path for transporting the telephone cables without causing overheat. If you overload the cable tray, you have to face so many problems. Signal loss, signal mixture, and noise production are some of the major problems that will have an impact on the overloaded cable tray. In order to avoid those conditions, you can install the cable trays in different sizes. So choose the suitable size for the cable and install the cable with a cable tray.

All the do’s and don’ts are aimed to reduce noise interference and to increase the efficiency of the cables. So follow these do’s and don’ts to install the telephonic cables and increase the efficiency of the cables.