What Is The Sunflower Seeds Roasting Machine?

Author: Maria Li

Firstly :What is the sunflower seeds roaster machine:

According to the heating mode, the baking machine is divided into two types: electric heating and gas heating. According to the material, it is divided into carbon steel and stainless steel. We can design continuous baking machines with different uses and forms according to your needs.

Then, the roaster machine details:

  1. mesh belt baking machine is composed of a rack, a conveyor mesh belt, a heating device and a thermal circulation device.
  2. This sunflower seeds roaster machine can used to different material and the selecting the appropriate material layer thickness for different material ventilation characteristics can effectively ensure the uniform penetration of hot air.
  3. The speed can be adjust.The driving drum of the transmission belt is driven by an electromagnetic speed-regulating motor, and the running speed can be adjusted in a wide range. The baking maturity control of the material is mainly adjusted by the running speed.
  4. Temperature controller can realize automatic temperature control.
  5. effectively matched to ensure the uniform drying of the material.

Next, the sunflower seeds roaster machine features:

Compared with similar products at home and abroad, the new high-efficiency energy-saving baking machine developed by combining the advantages of continuous baking machines, the taste of baked products is pure. It has the advantages of energy saving, safety, convenience, fast heating, stable performance, low power consumption, low operating cost, long service life, easy operation and maintenance, etc., and its baking quality has reached food hygiene standards and international production standards.

Finally,Scope of application of the sunflower seeds roaster machine:

This machine is mainly used in food processing industry, beans, nuts, nuts (such as peanuts, white rice, boiled five-spiced peanuts, melon seeds, almonds, chestnuts, broad beans), etc. to reduce moisture drying, roasted cooked products.

How to use this machine?

  1. Before starting the machine, check whether the power supply and transmission parts are normal, and whether the rotation direction of each motor is normal.
  2. The equipment must first start the transmission mesh belt and then heat up. The shutdown is to stop the heating first. The operation of the mesh belt can only be stopped when the temperature of the equipment drops below 80 degrees.
  3. The mesh belt chain has a lubricated needle valve type oil cup. When the equipment is running, add edible oil and open the needle valve. Lubricate the chain to prevent premature chain damage due to dry grinding.
  4. Turn on the circulating fan first, and then start the heating device. Because the temperature sensor can only measure the accurate temperature under the condition of hot air circulation.
  5. If the customer chooses gas heating, it must be strictly configured according to the gas source requirements of the burner, otherwise it cannot support the normal operation of the burner.
  6. When the equipment stops working, the equipment residues should be cleaned up in time and kept clean.
  7. Regularly check the lubricating oil (grease) of the reducer and bearing, and add it when it is insufficient to prevent oil shortage and wear.
  8. Recommended parameters:

The thickness of dried sunflower seeds is 20–30 mm, the baking temperature is 160–180 degrees, and the baking time is 20 minutes (the speed of the governor is 625r / min)

Master other materials as appropriate.

9. The controller of the electromagnetic speed regulating motor must pay attention to reset to zero after shutdown, and slowly adjust the speed after starting. Otherwise it is easy to burn the speed controller.

5. Repair and maintenance

1. Before starting, check whether the electric control system of the rotating cage is normal, whether the bolts of the rotating part are loose, whether the thermocouple pointer or digital display is flexible, and heat up when it is intact (open).

2. The reducer and the bearings at both ends of the shaft should be inspected with gear oil and grease on time to prevent damage due to lack of oil.

If you have interested, you can contact us by email :maria@machinehall.com

https://www.gelgoog.com/product/butter/seed-roasting-line.html