How to Get a Jar Open
If you want to learn how to get a jar open, you are going to need to take a look at the inside of the jar. You need to be able to figure out what is in there before you can start opening it. This will give you a better idea of how to get a jar open.
For instance, if you were trying to open a cup of coffee in your kitchen, you would look for a tea bag. Then you would take a handful of tea bags and break them apart into smaller pieces. Take the handfuls and place them into a small pot along with enough water to cover them.
You can then put the pot on a burner over medium heat and boil the water. As the water boils, you want to stir it with a spoon. You want to stir until all of the tea is dissolved and all the tea bags are coated in a bit of foam.
After the water boils, you will want to take the pot off of the burner and allow it to cool. You want to remove the coffee pot from the burner and let it cool to room temperature. Then you want to remove the lid from the pot and wipe the rim clean to ensure it is all clean.
Next, you want to use a metal spatula to lift the lid up and throw it onto a large flat object. This large flat object is going to be your pot. You will want to use something like sandpaper or a razor blade to scrape away any grime that is on the inside of the pot. Then you want to use a piece of cardboard to scrape down the inside of the lid and remove any stains that may have been on the lid itself.
Then you are going to want to use a sharp knife to pry off the lid of the pot. However, be careful when using a knife so as not to cut yourself. Be sure to make sure that the blade is sharp before you start moving it.
You also want to place the edge of the paper towel that has been placed over the glass on top of the lid to help absorb any moisture that may be present in the pot. When you have removed the paper towel from the pot, you will then want to take a razor blade and carefully go over the inside of the pot, being careful not to cut yourself. You do not want to cut yourself or the glass inside the pot.
Next, you will want to carefully get under the glass in the small square part of the pot. You are going to want to look for the hinge that holds the pot up. It is usually just a flat part of metal with a large hole in it.
You want to unscrew the small screw holding the hinge in place. You will find that there are small flat heads that will work great for this purpose. Take the flat head and gently push the hinge out of the pot.
Now you can find the two flat heads that are covered with grease. Put one of the flat heads in each hole and use the flat head to very gently pry the hinge off.
Once the hinge is removed, the two flat heads will fit into the holes and you will find that there is a small piece of metal sitting on top of the hinge. Put one of the flat heads in each hole and slide them in and out until the piece of metal pops out. You will need to use a file to smooth the edges to make sure that you get the whole piece out of the pot.To know additional info visit the website Click here
After you have taken the whole thing out, you need to carefully wipe down the inside of the pot and remove any crumbs that may be left over. You will then need to carefully readjust the hinges and put the cap back on the jar. and you should now be able to learn how to get a jar open.