How to Fix ‘No Internet’ Issue on My NETGEAR AC1750 Router?

Author: Netgear Login

Are you facing ‘No Internet’ issue on your NETGEAR AC1750 Router? Don’t worry; just by reading this write-up, you will learn how to fix it. Well, NETGEAR AC1750 is a great value router with exceptional range. You can buy it if you are shopping on a budget; you can buy an upgrade performance by paying a bit more for its price. The range in this device offers features for added performance with increased price.

You can buy the best model and brand of a router; wireless network issues are common in the device. You cannot avoid them, but troubleshooting helps in resolving most problems without technical support. You can use them by referring to a troubleshooting guide.

  • p>
For the already connected working router:

For an already connected working router, you can confirm the signal from your internet service provider (ISP). Try the following steps:

  1. Connect your computer directly to the router with an Ethernet cable after turn off the wireless function
  2. Check for an internet connection after rebooting the computer.
  3. If still not connected to the internet, reboot the router and any modems in use.
  4. Repeat this situation with your computer directly connected to the modem instead of the router.
  5. If still not getting an internet connection, contact your internet service provider.
  • For the new NETGEAR AC1750 router

You can refer to the manual available on the NETGEAR support website. If you can access the internet with a wired connection but not wirelessly, your wireless network may not emit a signal.

Reset NETGEAR router

If your new NETGEAR AC1750 router has no internet connectivity with the above steps, you should reset your router using Herd Reset or Soft Reset.

Steps for Soft Reset:

  1. Connect your computer to the NETGEAR AC1750 router.
  2. Type the default Gateway Web Address – www. routerlogin.net or 192.168.1.1. If it doesn’t work, try www.routerlogin.com or 192.168.0.1, and log in to your NETGEAR Router Setup Console Use.
  3. Enter the username and password. Use default username ‘admin’ and default password ‘admin’ if no other information is provided.
  4. Now Login to your NETGEAR Router and go to Backup Settings. You can see the option for revert to factory default settings.
  5. Click on Erase, and your NETGEAR Router Will Reset all settings to factory default.

Steps for Hard Reset:

If the soft reset doesn’t work, there is yet another option of hard reset. Follow the below steps:

  1. Take a paperclip or pen and press the Reset Key present at the back of your NETGEAR Router.
  2. Resetting is pretty easy. Hold the reset key for around 20 -30 seconds till the time all lights start blinking simultaneously.
  3. Restart your router and try to set it up from scratch.
  4. Don’t forget to update the firmware of your router after setup.

For firmware update, please follow the below steps:

  1. Log in NETGEAR wireless router setup page and check for updates. Make sure you are connected to the internet.
  2. For a login to NETGEAR router, type default gateway with the web address: www.routerlogin.net or 192.168.0 (or www.routerlogin.com or 192.168.1.1, if the first option fails).
  3. Enter the username and password.
  4. Login to the NETGEAR router and check for updates.
  5. Update firmware and restart the computer after an update.

Your ‘No internet’ issue in a new NETGEAR AC1750 router will be resolved at the most. However, you can seek technical assistance on the NETGEAR support website if you are unable to resolve your issue with any of the methods illustrated above.