An Easy Guide to Pool Maintenance Requirements
Proper swimming pool maintenance is a great way to keep your pool clean and sparkling. No owner wants to have a dirty pool in their backyard. When it comes to swimming pool maintenance, however, it's about more than just keeping your pool clean. You must ensure that the pool is also safe enough for your use. You can always seek the help of a pool service company.
Here is an easy guide to pool maintenance requirements which will help to keep your pool in good condition.
Vacuum the pool
Simply by vacuuming your swimming pool manually, you can help keep the water clean. You must start with the shallow end of the pool first and move onto the deep end. Move the vacuum slowly across the water.
Frequent cleaning of your pool during the swimming season can go a long way in terms of keeping your pool healthy and swimmable. The floor and walls of your pool can get a little dirty, especially when not cleaned properly. Always start by brushing the walls with a good scrubbing for your pool. In order to clean that gunk in the water and sitting on the floor of your pool, the best way is to vacuum it.
Check filter & shock pool
Swimming pool filter maintenance is a recommended component of the weekly cleaning regime. It is a simple task consisting of turning off the filter, taking out the filter cap and lifting out the filter basket. While checking the filter, remove any debris present and wash the filter net.
Shocking a pool is also called super-chlorination. This process includes adding more chlorine into the pool to remove any algae and bacteria. When you notice the current chlorine level reads below the recommended level, shock action can be required.
Test pool chemistry
One of the most crucial pool maintenance requirements a pool owner will have to do is test the pool chemistry approximately once or twice a week during the summer. Adjust the pH and alkaline levels accordingly, using a water chemistry test kit.
Your pool uses chemicals to keep the water clean enough for you to swim. If the levels start to drop or rise, this can be bad for you and your health. You don't want to get sick or leave your skin feeling weird. Checking the chemicals is also a difficult task. Therefore, it's best to leave it to pool experts.
Manage water level
Always inspect the water level to see if it's too high or too low. For optimal performance, the water ideally should be at the center level of pool skimmer and tile. If the water is too low, you can add water and if it's too high, drain some of the water by using a submersible pump.
If you're continuously refilling your pool, a pool service company can work to find the problem. It can either be as serious as cracks in your pool surface or it's a leaky seal around a light. Eventually, if the problem worsens, you'll have to pay more to get the issue fixed.
Clean skimmer basket
Similar to the pool filter, the skimmer basket most likely should be a part of the weekly cleaning regime. A pool skimmer is used to skim the surface of the swimming pool to ensure no debris gets saturated and sink to the bottom of the pool.
In order to clean the skimmer basket, turn off the swimming pool pump and remove the skimmer's lid and basket. Dump any debris out of the skimmer basket and rinse it with water. When it looks clean enough, you can place the basket back in, put the skimmer lid back on and turn the pump on.
Protect pool liner
You are required to look after the pool liner by making sure the chlorine and water levels aren't too high. Avoid sharp items and pets from entering the pool area and damaging the vinyl. After taking a dip into the pool, make sure the pool and pool deck area is clean.
Put any water toys, towels or lifejackets away in the stored area to prevent anyone from slipping on them. You should not forget to clean your pool deck as well to prevent stains and eliminate algae and mold. When you take care of proper pool maintenance, you get a healthy and clean swimming pool.