Understand your Irrigation system in less than 5 Minutes
Innovative dripping or sprinkler systems can undoubtedly contribute to enhancing the appearance of the lawn but apparently, it is quite difficult to even imagine such a vision without learning about your irrigation system. Often irrigation repair and maintenance are seen as a kid’s job but the reality is quite painful for some when they get to bear irrigation breakouts. It involves several fragile components whereas on the other hand also comes with a few warnings.
Introduction of Irrigation system
The irrigation system is a water distribution system and a drainage system at the same time. It comprises mainly two main components—the main intake structure & the pumping station. (Information Credit - https://www.acmeirrigationco.com)
1. Main intake structure
Purpose: It is situated at the entry of the irrigation system with the major purpose of directing water from the original supply source for instance reservoir or river, into the irrigation system.
2. Pumping station
Purpose: Pumping stations are used mainly when the irrigation water source lies unexpectedly below the irrigation field level. Therefore, a pump is installed to draw water immediately on demand.
5 Most Fragile or damage-prone parts of the Irrigation System
1. Sprinkler
Sprinklers or say the head of the irrigation system from which the output streams out is more than fragile than you may comprehend. They are narrow, consisting of a nozzle at the tip through which the flowing water gets filtered.
It often gets stuck with dirt or gets broken after prolonged years of usage. Therefore, given its fragileness, it is anytime suggested to contact professionals of irrigation repair in Tucson.
2. Underlying irrigation pipes
The pipelines situated under the ground are apparently hidden from the human eye. Many a time due to either an increase in humidity, frost build-up, or bad weather conditions these pipelines tend to burst thereby creating a great havoc situation.
3. Water controller
Water controllers are an automatic system which is responsible for delivering water at the set time. Due to prolonged years of service or multiple programming, the controllers can easily run-off.
4. Solenoid valve
Solenoid valves are fragile and easily get prone to dirt and debris. If you get a chance then do consider inspecting the valves regularly.
5. Drippers
The major problem that arises in the drippers is in their water flow which sometimes stops due to the rubber present inside. Many a time they even explode due to high water pressure.
Things to Never try with your Irrigation System
1. DIY repairs if you are a novice
Irrigation systems are complex with a lot of complicated components and matters to be fixed by untrained hands. Even if a tiniest of the fixation goes wrong you’ll end up missing almost the entire irrigation system. So as a matter of concern, it is suggested to avoid attempting DIYs if you are a novice.
2. Maintenance without proper Guidance
Well, there are several tricks and tactics involved in the irrigation maintenance, and if you think binge-watching a few videos can help you with this matter then think again.
Irrigation maintenance requires the right knowledge and techniques to carry on the entire process effortlessly.
3. Installation without the right knowledge
As discussed earlier in the context, the irrigation system is quite a complex system and its installation job is far more difficult than you may think.
A few irrigation systems involve digging and lining pipelines under the ground while making sure the future troubles are eliminated. Hence, without proper knowledge and some sort of experience, it is wise to never try doing the irrigation installation.
Furthermore, if you are planning to consult a reliable irrigation company to look after the requirements of your irrigation system then feel free to contact the best company for irrigation repair in Tucson, Acme Irrigation LLC.
From providing the repair services their job is also extended to irrigation installation and maintenance along with a complete guarantee.
On the contrary, we would like to add, the best way to understand your irrigation system, it’s functionalities, and performance is to ask your irrigation service provider on the go. Hence, do the same and praise your knowledge later.