Vertical blinds are the right choice at your home

Undoubtedly the right choice for you may be Vertical Blinds Vertical blind slats or slats are generally available in two sizes, 89 mm (3.5 ") or 127 mm (5"). For many years, vertical blinds starting at 127mm wide were often used as a standard in the office environment, however, in recent times 89mm, wide blind slats have become increasingly popular in the office environment. Modern home because of their clean-cut and elegant appearance.

When used in more traditional environments, vertical blinds used with curtains can give a very interesting layered and smooth look in any room. The most practical and popular use of vertical blinds can be seen mainly in greenhouses, oranges, and solariums. Sun protection is provided when vertical blinds are fully closed

When the slats are tilted, they provide degrees of light and shade, as well as a degree of privacy. Controls for a vertical blind can be positioned to the left or right of the header rail for ease of use. The headrail can be designed to allow the slats to be "stacked back" to the left, or to be stacked to the right or spread out in the center, this is commonly referred to as a center slot. The development of this type of awning was done for its ease of use and its brilliant user-friendly adjustment and adjustment system, the normal control of the system is by means of a rope to move the slats along the top rail and a chain on a gear mechanism to rotate the slats to tilt or close them

Shades are usually made to order, so the shade slats are ready to hang from the headboard rail when installed. The best quality blind slats are made with pockets sewn into the slats for the upper hangers and lower weights although some companies do glue the pockets and the problem with this method of manufacture is that the UV rays from the sun break. the stickiness of the glue and the pockets come undone. It is possible to get ready-made vertical blinds on the Internet or at local department stores in a variety of natural colors; the only problem is that if they do not match, you should try to modify them. It is better to order them to measure. Vertical blinds are very easy to clean and maintain with removable slats which can be cleaned with a sponge or can be obtained with washable fabrics if necessary. If you already have vertical blinds, it is possible to purchase only the replacement blind slats to hang them from your existing headboard rail. It's a cheaper way to change up your decor without purchasing a full shade and a method I would recommend.

Additional features you might want:

Self-lubricating wheels help the shade rails roll smoothly without you having to remove the WD40.

UV coating can make the color of your blinds last much longer without fading. If you live at high altitudes, where the UV light is strongest, or in a southern climate where the general light intensity is strong, a UV coating, especially on non-white blinds, might be worth an extra.

Rod control and chain control:

There are two mechanisms or ways to open and close the blinds and control the amount of light that enters between the slats.

Rope and chain controls are standard and the rod control is the newest and most advanced option. The lanyard and chain controls allow you to have separate controls for vertical movements: the fabric or lanyard is used to move the pallets horizontally, or back and forth along the top rail that passes over the top. above the window. So I would use the wire to completely remove the blinds and see through the glass.

The metal chain is used to control the angle of the vanes, so you use the chain to control the amount of the light coming in through the blinds with them still together. Rope and chain controls are considered a bit more dangerous than wand controls, as the cord hangs on the floor where children and pets sometimes get interested and get tangled.

For wand control, turn the wand to control the distance between the vertical louver blades and pull the wand along the top rail to open or close the louvers as desired.