Enhanced version with additional connectivity options

Author: Jack Conner

AirDrive Serial Logger Module Pro

The AirDrive Serial Logger Module Pro is an enhanced version of the AirDrive Serial Logger Module, with additional connectivity options. It works both as a Wi-Fi hotspot, and as a Wi-Fi device, enabling features such as Email reports and time-stamping. Modular beak-out board form factor, and easy to access from any Wi-Fi device such as a computer, laptop, tablet, or smartphone.

Features

  • Logs asynchronous serial transmission (RS-232 compatible)
  • Baud rates up to 115200 bps
  • Logs 2 streams simultaneously (RX and TX)
  • Modular form-factor with terminal block connectors
  • 16 gigabytes of built-in memory
  • Industrial grade flash memory
  • Works as a Wi-Fi hotspot, or as a Wi-Fi device
  • Sends Email reports with recorded data
  • Supports time-stamping
  • Supports live data streaming over network
  • Connect from any computer, smartphone, or tablet
  • Access data from web browser, no software or app necessary
  • Retrieve data remotely without touching the device
  • Simple and clear WWW interface
  • Supports WEP, WPA, and WPA-2 network security
  • Dual power: +5V (USB) or +9V...+24V DC (terminal connector)
  • Integrated step-down switching power supply
  • USB cable included

Data logging made simple

The AirDrive rs232 data logger Module Pro is a modular asynchronous serial logger, capable of recording RS-232 data streams from devices like printers, GPS receivers, terminals, keyboards, mice, barcode scanners etc. Connect the device either to a single serial source, or in-line on a serial bus. Connect +5V through USB or +9V...+24V DC power through the terminal connector. The AirDrive Serial Logger Module Pro will immediately start logging all data available on the bus, both upstream and downstream (RX and TX). No software or drivers are required.

Easy access

All AirDrive devices act as Wi-Fi hotspots. You can connect to them with any Wi-Fi device, such as a smartphone, tablet, or laptop without even touching the device! The AirDrive device will then present a webpage with the data log and configuration options. No additional software or drivers necessary.

Quick configuration

Configuring the AirDrive Serial Logger Module Pro is quick and simple. The only parameters that need to be set are the serial bus characteristics, such as the baudrate, bit count, parity and stop bits. This can be done in less than a minute through the configuration webpage.

The Pro version advantage

The Pro version adds a powerful set of features centered around the capability to act both as a Wi-Fi hotspot, and a Wi-Fi device with Internet connectivity. This unleashes a broad set of options, such as email reporting, time-stamping, and live data streaming.

The Max version advantage

The Max version has all the capabilities of the Pro version, enhanced with 16GB internal memory available as a USB Hi-speed flash drive (480 Mbps). For a serial device, this essentially means unlimited data storage, accessible both remotely and locally over USB.

Amiga Power Supplies

Amiga 500/500+/600/1200 replacement PSUs, available in a variety of chassis styles, colors, and power cable standards. Robust and reliable replacement power supply with +5V DC, +12V DC, -12V DC, and 5-pin square DIN plug.

Features

  • Replacement power supply for Amiga 500/500+/600/1200
  • Stabilized +5V/4.0A, +12V/2.0A, and -12V/0.5A DC
  • Over-current protection
  • Fused on AC and DC side and fully isolated
  • On/off AC switch on rear side
  • LED-illuminated high quality chassis
  • Durable and thick cables on both sides
  • Runs cold
  • Compact enclosure with modern shape modern shape 125 mm x 59 mm x 42 mm (5.0" x 2.3" x 1.6")
  • Square DIN5 plug with +5V, +12V, -12V DC
  • Four power plug options: US/CAN, EU, UK, AU/NZ

Robust and reliable design

The Amiga PSU was designed from scratch as a high-quality replacement for the original power supply. The Amiga version contains +5V/4.0A, +12V/2.0A, and -12V/0.5A DC switching power modules. The power supply has a sturdy custom-made chassis with an elegant LED-illuminated logo.

For more information, visit the following website:

  • a href="https://www.keelog.com/">https://www.keelog.com/