How to Protect Your Car From Overheating in Summer?

After few hours of running, the metal parts of your car become too hot. When the engine of your car reaches the extension level of the heat, then the temperature of the combustion engine leads to its normal temperature and the heat increased around 95-degree Celsius. As a result, it can damage the metal parts of your car and starts melting and fusing together. Consequently, it can cause a variety of internal problems in your engine and produce a hefty repair bill.

The coolant of your car plays an important role to prolong its life, increase the efficiency of the engine, prevent it from overheating issues and keep the car at its optimal running temperature. The role of coolant in your car is to convert the heat to air like the circulatory system of our body. The overheating problems of your car may connected with different components, but coolant loss is major issue that may overheat your car gradually. Consider the following points to know about the most effective techniques for protecting your car from overheating.

Verify the cooling system

In the last couple of years, the latest model cars are virtually free of maintenance. Now the car engine has their optimum level of temperature for achieving the best performance. So, in these cars, verifying the coolant level is very difficult. So, you can find out the coolant level by analyzing the maximum and minimum level of coolant reservoir because the reservoir is marked with an indicator to recognize the level easily.

The most important thing of the cooling system is the viscosity level of the fluid. If the level is too thin, then wrap up that your coolant needs to be topped up. In the cooling system, a radiator is an important component that can use a fan to regulate the coolant temperature. So, before the summer heat your car, replace the coolant and keep the fins of the radiator clean.

Check the coolant level

Especially in the summer season, the coolant can maintain the overall health of your car. As in the warmer weather, if the coolant level of your car is low, then it can expose your engine to overheat. Later on, that may lead to many serious damages in the internal parts of your car and provide costly repairs.

If you want to check the coolant level of your car, then you need to refer your owner's manual because each car has different models, configuration, and specifications. Before you check the coolant level of your car, make sure that the engine is off and has cooled down. If the engine is hot, then don't open the cooling system because it may cause injuries.

Top up the coolant

In the radiator and reservoir, if the coolant level is low, then you need to top up your coolant by using the recommended coolant for your car. Mixed the coolant with the best quality water at a fixed proportion. If you find out that the fluid level in the coolant reservoir is low, then you can add premixed coolant at a correct level to top up the coolant.

But, if the fluid level in the radiator is low, then you can add enough premixed coolant so that the fluid will be available at the top of the radiator. If your cooling system has some problem, then it requires regular topping up. When you find out a leakage in your cooling system, then the coolant level of your car dropping unconditionally. To handle this type of situations you need to take your car to an auto dealer or shop and check it as soon as possible.

Using water in coolant top up

If you are topping up your coolant system by using plain water, then the water will dilute the coolant. After a few months of uses, it will weaken the protection provided by the engine coolant. The ordinary tap water contains dissolved mineral and particles that may impede the efficient functioning of the cooling system and cause system failure. So, the coolant is always topped up with the proper proportion of the existing coolant in the engine.

If you have an emergency, then you can use quality tap water to top up the coolant system until you get the proper coolant for your car. To prevent the engine corrosion and to maintain the functions of the cooling system effectively, you need to add the correct coolant in your car as soon as possible.

Check radiator and cooling fan

For protecting your car from overheating, you also need to check out the radiator core of your cooling system for recognizing the insects and other blockages. By housing down, you can clean the radiator, but don't use the brush to clean it because the cooling fins in the radiator are fragile and get damaged.

Now the modern cars have a cooling fan to control the rising temperature of the engine. By turning on the air-conditioning, you can check out that the cooling fan is working or not. You can check out the current status of the cooling fan by running the engine and opening the hood. If you find out that your cooling fan isn't working, then you need to fix it as early as possible.

Conclusion

The rust and other contaminants may harm the engine system. So, the high-quality coolants need to mix in the system correctly. Go through the owner's manual to get detail knowledge about the capacity of the cooling system, requirements of the coolant with its complete filling procedures.