The Importance Of A Aquarium Heater

When setting up an aquarium, there are many facets to keep in mind. Between the plants, the gravel, the filter, and lighting, there are a plentiful amount of decisions to make and lots of choices. However, one important item that every so often gets overlooked is the fish tank heater.Different fish require different temperatures so make definite you research the requirements for the particular varieties, you decide on.

Fish typically need water temperatures of 80 degrees or above; in order to reach and keep these temperatures, a water heater is necessary.

Just like tanks come in many different shapes and sizes, aquarium heaters come in a wide range of dimensions with an assortment of features and at a variety of price points.

One of the most important characteristics of aquarium water temperature is STABILITY.

As a law of thumb, water temperature should not change more than a twosome of degrees on a daily basis.

A stable heater that can sustain a constant water temperature is a must.

Widely Use The heater is a Submersible Water heater for Aquarium

Submersible Heaters

Just as their names say, submersible heaters lie under the water level in your tank.

Generally speaking, submersible heaters must stay submerged or they danger to damaging their heating element.

Keep this in mind each time you plan on changing the water or moving the heater or tank.

These types of heaters are commonly placed under the aquarium’s filter output, heating water as it enters the environment.

This technique keeps a steady stream of heated water circulating within the tank.

One recommended submersible heater would be the Thermostat CX-J25 300W / Heater

This particular heater even has a built-in thermostat and a visible temperature setting for a better experience.

Installation and Use

Heaters, regardless of their location relative to your tank, have different controls.

Make sure to read the manual that comes with your heater preceding to use it for the first time and definitely before adding fish to your aquarium.

Many internal heaters come with suction cups that will adhere to the side or bottom of your tank but check the packaging for this material before you buy.

If they do not come with the proper installation hardware, make sure you buy it separately.

Some heaters come with integrated temperature gauges to keep an eye on the temperature in the atmosphere.

Again, if this hardware is not included in your heating solution, take a separate thermometer before you leave the pet store.

Allow plenty of time for your aquarium water to heat up prior to adding fish, so that the glass and water can gain similar temperatures and prevent the glass from breaking.

Pick the Proper Heater

A common guideline for choosing a fish tank heater is to choose one that can output 3 to 5 watts of power per gallon.

The wattage of the heater determines the ability of the unit’s ability to heat and maintain the temperature within the aquarium.

Hope this post is useful for you. I would appreciate it if you can share this with anybody who you think might find this article useful too!

Drop a comment below with any questions that you might have or share your personal experience. Thank you.

Contact Us:

blessingsaquarium.com

Address (1):Blessings Aquarium Shop No. 28, Imperial Residence, Near Barbeque Nation, Kalyani Nagar Pune 411006Address (2):

Blessings Aquarium:

Prasad 2/7 Hindvijay Co-operative Housing Society Near Joggers Park,

Viman Nagar, Pune, Maharashtra 411014

Call us : +91 98814 93396