Help Mobile Screen Stays Black by Mobile Repair Online

It is probably the greatest nightmare of every smartphone owner when the smartphone screen stays black. It is not uncommon for mobile to go out, and the screen, even after repeated attempts to switch it on, does not react and remains black.

But instead of panicking right now and imagining the worst, it is important to stay calm and act correctly. Mobile Repair Online explains what causes the smartphone screen to remain black and how you can best avoid this. In addition, we will give you tips on how to get your smartphone working again and what to do if the smartphone screen fails.

In This Article

• Causes for the failure of the mobile screen
• What can I do if the display stays black?
• Mobile Repair Online also recommend the recovery mode
• This is how you can put your iPhone into recovery mode
• How to put your Android phone into recovery mode
• Smartphone display failure after damage

Causes for the failure of the mobile screen

The causes for the failure of a smartphone screen can be very different. However, one of the most common causes of mobile screens remaining black is a software glitch.

Often files are not loaded correctly or completely, and the smartphone screen remains black. Another reason can be a defective or deeply discharged battery.

The battery can be deeply discharged, especially if a smartphone has not been in use for a long time. If a cell phone is in a drawer for a long time, it is uncommon to no longer start. Problems often arise here, especially with older models.

Also, defective batteries can affect the performance of a smartphone. In addition to charging difficulties and hang-ups, a defective battery is particularly evident because the smartphone screen remains black and no longer reacts.

Another source of danger that can easily be avoided: Outdated firmware. If you regularly update the software on your smartphone and carry out all security updates, you can easily protect yourself from a black screen.

Finally, if the smartphone display suddenly stops working, this may also be due to a defective charger. Even if the temperature is too high or too low, the device may crash. So give your smartphone some rest first and then start resuscitating it by Mobile Repair Online.

What can I do if the display stays black?

If the smartphone display stays black, you should first check that it is not just a discharged battery. To do this, it is advisable to connect the smartphone to a charging cable.

If the smartphone does not respond, the power supply should be checked, and another charging cable should be tried. In addition to a defective charging cable, the slot on the smartphone can also be contaminated.

Dust and sand can block the port and prevent the phone from charging. If these possibilities are excluded, the smartphone should be charged enough and fully functional after approx. 30 minutes.

Mobile Repair Online is recommended to restart your iPhone of the smartphone. Press the home button and the power button for 10 seconds to restart the smartphone. A reset can be started with an Android smartphone if you press the power button and the button that increases the volume for ten seconds.

Click here to read: Online Mobile Repair or Buy New Phone?

Mobile Repair Online also recommend the recovery mode

If none of the above measures work, there is always the option of putting the smartphone in recovery mode. However, before activating the recovery mode, you should know that all data that was not previously saved in a backup will be lost.

The recovery mode is used to reset the smartphone to the factory settings. As helpful as this option is, it does not guarantee that the smartphone will work properly again.

Therefore, think carefully before activating whether you would rather consult an expert. Depending on the device, the recovery mode for iPhones and Android Smartphones are triggered differently. Or you can take help from Mobile Repair Online that can come to your doorstep and help with any mobile problem. Whether it: Apple, Xiaomi, Samsung, Oneplus, Vivo, Oppo, Motorola, Lenovo.

This is how you can put your iPhone into recovery mode

First of all, the iPhone must be connected to the PC with the data cable. Then, if the device is not recognized directly, you can hold down the home button and the power button for ten seconds.

As soon as iTunes recognizes the device, a window will open with various options. With the "Restore iPhone" function, the iPhone is reset to the factory settings.

Important: All data saved on the device will be lost. If the iPhone should work after that, a backup can be carried out with all stored data.

How to put your Android phone into recovery mode

Mobile Repair Online says Android smartphones, as with a restart, the power button and the "increase volume" button are pressed. It will take you to DFU mode. Various options are also displayed here.

For example, select the "Reboot System now" function. Then you can click on "Wipe data/factory reset," and the smartphone will be reset to the factory settings immediately.

Smartphone display failure after damage

In addition to the unclear reasons for a display failure, a smartphone screen can no longer work if the hardware is damaged. It can happen from a fall or too much pressure. Even if the display glass is not damaged, the LCD can tear - this is usually reflected in the fact that the smartphone screen remains black. In such a case, it is always advisable to have the cell phone checked by an expert.