Printer ribbon, printer parts, wholesale printer ribbon suppliers, printer ribbon wholesaler

Author: Printer Field

What is a printer ribbon and how to install it?

A printer ribbon is a spool of alternating colored dyes which is present in the cartridge of a printer. Generally, it is used in the dye-sublimation printers, the four CMYK colors are used for each print. A CMYKO ribbon is the CMYK ribbon with a clear overlay at the end. For ID card printers that print on both sides of the card, a CMYKOK ribbon is used as it prints black on the second side.

Every print has its CMYK colors of the ribbon and printer ribbons have a particular number of prints irrespective of the colors that rule in the image. On the other hand, inkjet cartridges run out at different times, depending on how much ink is used. Wholesale printer ribbon suppliers can provide you with a printer ribbon that is best suited for the type of printer you are using.

Which printer uses ribbon?

Not all printers use a ribbon. The typewriter and dot matrix printers use ribbon cartridges the most. The dot-matrix printers print images by striking small dots that come into contact with a cloth strip soaked in the printer ink. Thermal printers are used in cash machines, faxes, and similar devices that use printer ribbons. You can find a wide range of printer parts with the wholesalers.

How to install the ribbon cartridge?

If you don’t know how to install the ribbon cartridge, then follow the below-mentioned steps:

Loading the printer ribbon: You need to load the ribbon when you install the printer and when the ribbons run out. Follow these steps:

  1. Open the printer cover
  2. Remove the print ribbon cartridge
  3. Place the new print ribbon onto the spindle which is closest to the cartridge handle and press down
  4. Place the silver take-up spool on the spindle with the black gear and press down until it sits in the place
  5. Wind the take-up spool counterclockwise once

Loading the cleaning sleeve: Load a new cleaning sleeve with each new roll of print ribbon whenever you notice dust or debris on the printed cards.

  1. Look for the cleaning roller spindle and slip the spindle into the cleaning sleeve
  2. Place the spindle with cleaning sleeve in the ribbon cartridge
  3. Eradicate the protecting wrapper from the cleaning sleeve

Install the ribbon cartridge: Install the assembled print ribbon cartridge into the printer

  1. Firstly, open the printer cover
  2. Hold the print ribbon cartridge by the handle and put it into the printer with the handle toward the front of the printer
  3. Ensure that the ribbon cartridge is positioned in the guides
  4. Close the printer cover. Press down on the ridges on the front of the cover to ensure it latches completely on both sides.

How does the printer ribbon work?

During the printing process, heat-sensitive paper is put into the printer and then pressed between the printer’s thermal head and the platen roller. The paper comes into contact with the ink in the ribbon cartridge by using the spring on the printer head. Contact printer ribbon wholesaler to buy the best quality ribbon and other accessories for your printer.