How to Steam Clean your Curtains by yourself | Gleam Curtain cleaning Adelaide
Curtains look most beautiful when maintained well, and this involves cleaning them regularly to eliminate accumulated dust, grime, and scents that stick to fabric strands. While you can wash some curtains and others must be dry cleaned, you could use another cleaning technique: steam. Many curtains withstand steam washing well. If your drapes are made of velvet or dralon, do not use steam since it can harm them.
A primary advantage of Curtain Steam cleaning Adelaide is that no chemical cleaners are required. The steam's heat also acts as an organic and natural bactericide, keeping places free of bacteria and contaminants.
The task requires only a steam cleaner of high quality, water, and a heating source. One or two attachments, such as a tool brush for cleaning drapes and upholstery, should be included with the cleaner.
You can hire a Curtain Cleaner Adelaide to have your curtain cleaned, or you can steam clean them the way mentioned below.
Curtain Steam Cleaning Services Steps
Before you do anything else, check the care tag on your drapes. If your curtains are heat sensitive, steaming may cause damage to the fabric.
- 1 Filling the Tank
Allow the curtains to hang on the rod. Fill the tank of the steam cleaner according to the manufacturer's recommendations but don't overfill the container. Connect the steamer to the closest wall outlet and let the water heat up sufficiently to generate steam. You may have to wait a few minutes for this to happen. When you're ready, connect the jet nozzle to the hose. Because of the powerful blast of heat, using this nozzle first might assist remove dirt and debris.
- 2 Testing
Begin by steaming a small portion of the curtain in an unnoticeable location. You could try a bottom corner. Allow the area to dry before inspecting the cloth for discolouration or damage. If everything appears to be in order, you may proceed with the deep cleaning. Because steam can be hot, use caution when holding the nozzle to avoid skin burns.
- 3 Spraying the Curtain Surface
Start steaming one piece at a time, keeping the attachment tool at least 6 inches away from the curtain. Begin at the very top and slowly lower the nozzle to the bottom. If the curtain becomes wet, pull the nozzle further away from the surface.
- 4 Make use of the Drape or Fabric Tool
Connect the steamer hose to the drape or fabric tool. Steam the drape in parts while holding the hose erect. The brush should just lightly touch the material, and you only need a slight touch to clean the curtains from top to bottom.
- 5 Allow to Dry
Leave the curtains to dry naturally. They should have a clean appearance and be odour free.
Not everyone has the time and money to perform curtain cleaning services themselves. Here's where you can call reliable and competent professionals. We have top-grade equipment and the industry's best crew for Curtain Steam cleaning Adelaide.